Laboratory CAD CAM Dental Milling Machine Mechanical 5 Axis
Dental 5 axis milling machine table dental for zirconia block, PMMA
and Wax disc
Shenzhen Yucera Dental Material Co., LTD is a comprehensive
enterprise specializing in developing, manufacturing and marketing
of Dental Zirconia Ceramic Block, corresponding CAD/CAM equipment,
and other related dental products. As professional laboratory
materials supplier, we can provide digital dental materials, dental
equipment, and full range of digital products and services.
Technology Parameter of CADCAM dental milling machine
| Length, width and height | Cutting machine:550*565*460mm Main engine :450*250*450mm | Processing methods | Five-axis linkage, dry milling |
| weight | Cutting machine:95KG Main engine:20KG | Processable type | Inner crowns, full crowns, bridges, implant bridges, implant upper
restorations, inlays, onlay, veneer, coping etc. |
| Rotating axis operating angle | A:360° B:±30° | Main axis speed | 0-60,000rmp |
| Total power | 800W | Working pressure | 4.5-7.5bar(no water, no gasoline ) |
| Cutting precision | 0.2mm | Installation conditions | Stable voltage:220-230V Stable air pressure≥6.0bar Temperature:15-35℃ Relative humidity＜80% |
| Tool magazine capacity | 5 | Transmission interface | USB/Ethernet |
| Burs specifications | Special props for handle diameter 4mm Automatic tool change, automatic tool detection | Milling Materials | zirconia blocks , PMMA, Wax,Composite material |
Advantage of CADCAM dental milling machine
1. Horizontal processing VS Vertical machining
Based on the original stable vertical machining, the horizontal
milling machine
puts the center of gravity lower.
2. Vertical and horizontal processing are both cradle processing
(Suitable for small precision parts processing).
There is not much difference between these two in the layout
and processing mode, but due to the excellent stability of
horizontal processing, the speed can be increased by nearly 20%.
3. Easy to maintain:
*When the all-in-one machine fails, the after-sales maintenance is
more complicated. The seperate machine design only needs to replace
the processing system to complete the update and maintenance;
*The control system is separated from the processing system to
reduce the slight damage caused by dust for the main engine.
