3D plus Multilayer Yucera Pre Sintered Zirconia Dental Ceramic
Materials Multilayer With 16 Colors and bleach
A1 A2 A3 3D Multilayer Zirconia Block Blank Disc for Laboratorio
Dental, 43% to 57% 700-1050MPA Zirconia for Tooth Gems
Application of Yucerta 3D plus multilayer zirconia block:
1. Veneer
2. Posterior crown
3. Full crown bridge
4. Anterior crown
5. InlayFull contour screw retained bridge
6. Full arch crown bridge
7. Implant
Available shades and sizes of Yucera 3D plus multilayer zirconia
block:
| Open System | Zironzahn System | Amann Girrback | Available Shades |
| 98*10mm | 95*10mm | 89*71*10mm | A1-D4, BL1, BL2, BL3 |
| 98*12mm | 95*12mm | 89*71*12mm | A1-D4, BL1, BL2, BL3 |
| 98*14mm | 95*14mm | 89*71*14mm | A1-D4, BL1, BL2, BL3 |
| 98*16mm | 95*16mm | 89*71*16mm | A1-D4, BL1, BL2, BL3 |
| 98*18mm | 95*18mm | 89*71*18mm | A1-D4, BL1, BL2, BL3 |
| 98*20mm | 95*20mm | 89*71*20mm | A1-D4, BL1, BL2, BL3 |
| 98*22mm | 95*22mm | 89*71*22mm | A1-D4, BL1, BL2, BL3 |
| 98*25mm | 95*25mm | 89*71*25mm | A1-D4, BL1, BL2, BL3 |
Product features of 3D plus multilayer zirconia block:
1. Sintered Density of multilayer zirconia block: 6.07 ± 0.03g/cm3
2. Outstanding aesthetics – highly esthetic, monolithic
single-tooth and bridge restorations in the anterior and posterior
region.
3. Translucency of multilayer zirconia block 57-43%, adjusted
translucency gradient ensures good coverage in the cervical area
and increased translucency in the incisal area.
4. The integrated color gradient also ensures the efficient
fabrication of natural-looking restorations.
5. Extensive color selection – 19 colors (Blench, A1-D4).
6. Bending Strength of multilayer zirconia block:700-1050 MPa
7. Hardness of multilayer zirconia block 1200HV
8. Wide range of indications – from single-tooth restoration to
multi-unit bridge.
9. Self-colored dental multilayer zirconia block
10. CAD CAM digital system
Detailed Product Description of 3D Plus Multilayer Zirconia Block:
Yucera 3D plus multilayer zirconia block is the most high end class
zirconia, the most nature zirconia, which changes color(from dark
to light) , strength( from 1050mpa-700mpa), and
translucency(43%-57%) gradually from cervical to incisal part at
one multilayer zirconia block.
This multilayer zirconia block can make both posterior teeth and
anterior teeth. One zirconia to cover all indications.
We can copy natural teeth's color, strength and translucency to the
utmost. It is the best materal for your market following the trend
with high strength, excellent permeability and color aesthetic
repairing restoration, which is suitable for all CAD/CAM and manual
system.
This multilayer zirconia block can make both posterior teeth and
anterior teeth. One zirconia block to cover all indications.
Yucera's 3D plus multilayer zirconia block, feedbacks:
Sintering Curve for 3D plus multilayer zirconia block:
