The ceramic ball mill media is the same as that of the liner, which
is made of alumina ceramics. According to the different grinding
materials, the grinding medium can also be made of quartz or silex.
As the ceramic ball mill media, ceramic alumina balls have the
advantages of low wear, high hardness, high density, and low cost,
which can maximize the purity of the crushed materials and obtain
high grinding efficiency.
The ceramic alumina balls in the ceramic ball mill machine is
generally added to three to four different specifications, which is
related to the feed and discharge particle size and the speed of
the ball milling machine. When only dispersing the material, only
one type of ceramic alumina ball can be added. The proportion of
grinding ball is related to the grinding method of the ceramic ball
mill. The ratio of large balls, medium balls, and small balls in
dry and wet ceramic ball mill is also different.
Ceramic ball mill media
In the grinding process of dry ceramic ball mill machine, the
function of large and small ceramic alumina ball is different.
Relatively speaking, the large ceramic alumina ball is beneficial
to the impact effect, while the small ball is beneficial to the
grinding effect. When the ratio of the grinding ball is reasonable,
the higher bulk density can be obtained. Therefore, the reasonable
ratio of large and small balls is an important factor affecting the
efficiency of dry ceramic ball mill machine.
For the wet ceramic ball mill, because of the participation of
liquid, the material is crushed by grinding rather than impact.
Therefore, the amount of large ceramic alumina balls should be
appropriately reduced, and small and medium balls should be added
to ensure a good grinding effect. The initial grinding ball ratio
of wet ceramic ball mill machine is generally 30% for large ceramic
alumina balls, 40% for medium balls and 30% for small balls.
Performance Advantage Of Ceramic Ball Mill
The products of ceramic ball mill have uniform fineness, save
power, have less investment, save energy and electricity compared
with similar products, have novel structure, easy operation, safe
use, stable and reliable performance and so on.
The motor of ceramic ball mill machine is auto-coupled under
reduced pressure to start and reduce the starting current. Its
structure is divided into integral type and independent type.
The rotating large gear of the ceramic ball mill is processed by
casting and rolling gear, and the wear-resistant liner is set in
the cylinder body, which has good wear resistance.
Technical Details of Ceramic Ball Mill
| Specification(mm) | Maximum Charge(tons/time) | Rotate Speed(r/min) | Motor Power(kW) | Liner Type |
|---|
| φ600×700 | 0.05 | 50 | 2.2 | Ceramics, Silex, Rubber, Metal |
| φ800×600 | 0.075 | 42 | 3 |
| φ900×1200 | 0.2 | 38.5 | 5.5 |
| φ1300×1500 | 0.5 | 33 | 7.5 |
| φ1500×1800 | 1.2 | 28.5 | 11 |
| φ1800×2000 | 1.5 | 24 | 15 |
| φ2600×2800 | 5 | 16.5 | 37 |
| φ3000×3800 | 10 | 14.5 | 57.2 |
| φ3200×4600 | 15 | 13.5 | 75 |
