BTS Temperature Sensor For Temperature Monitoring Of Base
Transceiver Station
Product Description:
This ntc temperaturesensor is a BTS temperature sensor for the
temperature monitoring of base transceiver station. Base
Transceiver Station typically houses the equipment required for
wireless communication, including the radio transceivers, power
supplies, and other components. To ensure proper functioning and
prevent damage, monitoring the temperature inside the cabinet is
crucial. A temperature sensor is commonly used to measure the
temperature within the BTS cabinet.
The temperature sensor is usually placed inside the cabinet and
connected to a monitoring system. There are different types of
temperature sensors available for Base Transceiver Station, such as
thermocouples, resistance temperature detectors (RTDs), and
thermistors. But NTC thermistor has its advantage compare with
other temperature sensors such as Sensitivity, Wide Temperature
Range, Cost-Effectiveness, Size and Packaging Options, Fast
Response Time, and Self-Heating Compensation.
The temperature sensor is connected to a monitoring system, which
can be a dedicated device or part of a larger network management
system. The monitoring system continuously collects temperature
data from the sensor and provides real-time information about the
cabinet's temperature.
By monitoring the temperature inside the BTS cabinet, network
operators can ensure that the equipment operates within safe
temperature ranges. If the temperature exceeds the predefined
thresholds, the monitoring system can trigger alarms or
notifications to alert the operators. This allows them to take
appropriate action, such as improving ventilation, adjusting
cooling systems, or addressing any equipment issues that may be
causing the temperature rise.
Properties of BTS Temperature Sensor
R25℃=50KΩ±3%
B25/50=3950K±1%
Number Tube: PVC φ4 L=10mm
Probe 1: SUS φ3x10
Wire 1: HTD3050-15m-3
Probe 2: SUS φ5*30
Heat shrink tube: φ2.5*200±10/ φ2.5*1000±20
Wire 2: UL3656 30AWG (7/0.1) x 2C OD0.75 x 1.6
Connector: DB9 (Male)
Encapsulation: Epoxy resin
Application:
Temperature monitoring of Base Transceiver Station cabinet. This
product can monitor temperature and humidity simutaneously.
Drawing:
Product Images:
