2-Way Reinforced Aluminum Foil Scrim Tape - FS2805B
Description:
2-way Foil-Scrim facing laminated fiberglass blanket backing(Foil:
25u / 2-way Scrim: 5x5mm), combined with a transparent high
performance synthetic rubber-resin adhesive, protected by an
easy-release silicone release paper.
Standard Products:
| Product code | Aluminum Foil Scrim Tape - FS2805B |
| Material | Aluminium Foil Scrim facing laminated fiberglass |
| Gule | High Performance Synthetic Rubber-Resin Adhesive |
| Cut Roll | 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm
(4") |
| Log Roll | 1200mm x 45M / 50M |
| Jumbo Roll | 1200mm x 500M / 750M |
| Sample | Free, Freight on buyer |
Typical Physical Properties:
| PROPERTIES | METRIC | ENGLISH | TEST METHOD |
| Backing Thickness | 50 Micron | 2.0 Mil | PSTC-133 / ASTM D 3652 |
| Total Thickness | 90 Micron | 3.6 Mil | PSTC-133 / ASTM D 3652 |
| Adhesion to Steel | 20 N/25mm | 72 Oz./In. | PSTC-101 / ASTM D 3330 |
| Tack Rolling Ball | 20 cm | 8.0 In. | PSTC-6 / ASTM D 3121 |
| Tensile Strength | 120 N/25mm | 27.3 Lb/In | PSTC-131 / ASTM D 3759 |
| Elongation | %. | 3.0 | PSTC-131 / ASTM D 3759 |
| Service Temperature | -20 ~ +80 °C | -4 ~ +176 °F | ------------ |
| Applying Temperature | +10 ~ 40 °C | +50 ~ +105 °F | ------------ |
Features:
• Heat reflection and Light reflection
• High adhesion and stability solvent adhesive
• Vapor barrier and moisture proof.
• Wear-resistant
Applications:
For the glass wool, rock wool, mineral wool and other thermal
insulation materials, heat-sealing veneer and vapor barrier layer,
for cotton, cotton and cotton liner online heat sealing veneer, to
meet HVAC duct, cold and warm water pipe Adiabatic and vapor bamer
needs and insulation requirements for steel construction.
Packaging & Shipping
Surface Preparation
It is essential, as with all pressure-sensitive tapes, that the
surface to which the tape is applied must be clean, dry, free of
grease, oil or other contaminants.
Product Use
It is essential that the user evaluate the KintTape product to
determine whether it is fit for a particular purpose and user’s
method of application. Good results will be obtained when applied
to a clean, dry surface with a suitable pressure on KintTape
products between +10℃ ~ 40℃(+50°F ~ +105°F).
