When designing the air flow drying system, the factors such as
turbulence, cyclone separation and heat exchange are fully
considered, so that the
configuration of the heat exchanger, the temperature control of the
inlet and outlet air, the diameter change of the cyclone tube and
other
configurations and parameters have a clear theoretical basis. By
measuring the water content of the feed or the temperature
difference between
the feed port and the discharge port, the feed amount and the steam
amount of the feed port are automatically adjusted, so that the
water content
of the product can meet the process requirements. This air dryer is
not only suitable for the drying of various potato starch, but also
suitable for
the drying of corn starch and wheat starch.
Main technical parameters
Model | DG-3.2 | DG-4.0 | DG-6.0 | DG-10.0 |
Output(t/h) | 3.2 | 4.0 | 6.0 | 10.0 |
Power capacity(Kw) | 97 | 139 | 166 | 269 |
Moisture of wet starch(%) | ≤40 | ≤40 | ≤40 | ≤40 |
Moisture of dry starch(%) | 12-14 | 12-14 | 12-14 | 12-14 |
Advantages of airflow dryer
1. All factors of turbulence, cyclone separation and heat exchange
are fully considered.
2. The part in contact with starch is made of 304 stainless steel.
3. Energy saving, stable product moisture content.
4. The moisture content of starch is very stable, and the moisture
content of starch is controlled by controlling the feed amount of
steam and wet
starch, which can be automatically controlled between 12.5% and
13.5%.
5. Less starch loss from wind depletion.
6. A complete solution for the entire flash drying system.
