YASKAWA Electric Corporation | SGDH-02AE Servo drives Brand New
orginal
Description
| Part Number | SGDH-02AE |
| Manufacturer | Yaskawa |
| Type | AC Drives |
| Warranty | 1 year |
| Model # | SGDH-02AE |
About this Manual
This manual provides the following information for the Σ-II Series
SGMBH/SGDH Servodrives
• Procedures for installing and wiring the servomotor and
SERVOPACK.
• Procedures for trial operation of the Servodrive.
• Procedures for using functions and adjusting the servodrives.
• Procedures for using the built-in Panel Operator and the
Hand-held Digital Operator.
• Ratings and specifications for standard models.
• Procedures for maintenance and inspection. Intended Audience
This manual is intended for the following users.
• Those designing Σ-II Series servodrive systems.
• Those installing or wiring Σ-II Series servodrives.
• Those performing trial operation or adjustments of Σ-II Series
servodrives.
• Those maintaining or inspecting Σ-II Series servodrives.
Description of Technical Terms In this manual, the following terms
are defined as follows:
• Servomotor = Σ-II Series SGMBH servomotor.
• SERVOPACK = Σ-II Series SGDH SERVOPACK.
• Servodrive = A set including a servomotor and Servo Amplifier.
• Servo System = A servo control system that includes the
combination of a servodrive with a host computer and peripheral
devices. Indication of Reverse Signals In this manual, the names
of reverse signals (ones that are valid when low) are written with
a forward slash (/) before the signal name, as shown in the
following example:
• S-ON = /S-ON • P-CON = /P-CON
Visual Aids
The following aids are used to indicate certain types of
information for easier reference.
Indicates important information that should be memorized, including
precautions such as alarm displays to avoid damaging the devices.
Indicates supplemental information. Indicates application examples.
Indicates definitions of difficult terms or terms that have not
been previously explained in this manual.
The text indicated by this icon explains the operating procedure
using Hand-held type Digital Operator (Type: JUSP-OP02A-2).
Related Manuals
Refer to the following manuals as required. Also, keep this
manual in a safe place so that it can be referred to whenever
necessary
| Manual Name | Manual Number | Contents |
| Σ Series/Σ-ΙΙ Series Servopacks Personal Computer Monitoring
Software Operation Manual | SIE-S800-35 | Describes the applications and operation of software for the Σ
Series/Σ-II Series servodrive monitoring devices for use on
personal computers. |
| Σ-ΙΙ Series SGM
H/SGDM Digital Operator Operation Manual | TOE-S800-34 | Provides detailed information on the operation of the JUSP-OP02A-2
Digital Operator, which is an optional product. |
Safety Information
The following conventions are used to indicate precautions in this
manual.
Failure to heed precautions provided in this manual can result in
serious or possibly even fatal injury or damage to the products or
to related equipment and systems.
Indicates precautions that, if not heeded, could possibly result in
loss of life or serious injury. Indicates precautions that, if not
heeded, could result in relatively serious or minor injury, damage
to the product, or faulty operation.
Indicates actions that must never be taken.
Safety Precautions
The following precautions are for checking products upon delivery,
installation, wiring, operation, maintenance and inspections.
Our Brands:
| 【Honeywell】 | Module DCS/PLC/Transmitter |
| 【Emerson/Delta V】 | Module/ CT Motor & Drives |
| 【ABB】 | I/O Module |
| 【AB】 | Module&Touch Screen |
| 【Rosemount】 | Transmitter |
| 【Yokogawa】 | Transmitter |
| 【Yaskawa】 | Servo Drive&Servo Motor |
| 【GE/Fanuc】 | IC69 Series PLC |
| 【Mitsubishi】 | Servo Drive&Servo Motor |
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
Company Introduction
