JYQD Brushless DC Motor Driver Board With Speed regulation For Hall Sensor Motor

DC Brushless Motor Driver Board With 0-100% PWM Duty Cycle 1-20KHz PWM Frequency

Product Description:

Introducing the BLDC Driver Board, a DC Brushless Motor Driver Board designed to provide maximum performance for DC Brushless motors. This DC Brushless Driver Board features a PWM Duty Cycle of 0-100%, support Hall Sensor, input voltage range of 12V/24V DC, and a Speed Control Range of 0-100%. With a resilient Working Temperature range of -20℃~+85℃, the BLDC Driver Board is a reliable and durable choice for a variety of applications.

Features:

• Product Name: BLDC Driver Board
• Colour: Blue
• Product model: JYQD-V7.0
• PWM Frequency: 1-20KHz
• Speed Control Range: 0-100%
• Hall senor: Yes
• Brushless DC Driver Board
• Direct Current Brushless Motor Driver Board

Technical Parameters:

Applications:

JUYI JYQD-V7.0 BLDC Driver Board is a state-of-the-art Direct Current Brushless Motor Driver Board designed to provide a reliable and efficient control system for Brushless DC motors. It employs advanced Hall senor technology, offering a PWM frequency range of 1-20KHz, and enabling Analog voltage speed regulation. This product is ideal for a variety of applications, such as robotics, automation, industrial machinery, electric vehicles, and medical equipment. The JUYI JYQD-V7.0 BLDC Driver Board is available in both 12V/24V DC versions, and provides smooth and precise control for your DC brushless motor.

Wring Diagram:

1.Control port

5V — Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation

Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

SC—Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.

GND—Used for Drive board internal control

2. Power port

MA ----motor phase A

MB ---- motor phase B

MC---- motor phase C

GND----DC-

VCC----DC +

3:Hall sensor port

Ha--- Hall a

Hb---Hall b

Hc---Hall c

GND---GND

5V---5V output

4. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
5. Control port distance: 2.54mm,Power port distance:2.54 mm
6. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.

Dimension Drawing:

Application guidelines:

1. Confirm that the voltage and power parameters of the motor not exceed the range as specified.
2. Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding,

you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect.

3. JYQD-V7.0 is driver board without housing and heatsink, it can drive the motor below 36 watt without any heatsink, but needs normal ventilation.
4. The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, commutation and enabling operation

Support and Services:

We provide technical support and service for our BLDC Driver Board products. Our technical team consists of highly skilled and experienced engineers who can help you with product selection, installation.

If you are experiencing any problems with your BLDC Driver Board, our technical team can provide assistance. We can help you diagnose and resolve any issues you may be having.