11600psi Water Blasting Machine Hydro Blaster Diesel Engine Drive
Details:
1. The power end shaft shell is made of cast iron. It is stronger
than aluminum alloy.
2. The crosshead is made of babbitt. It has a long service life for
industrial design.
3. The hydraulic end pump head is made of 40Cr cemented carbide. It
can work continuously for cleaning.
4. All hydraulic ends are designed to facilitate unloading, so they
can be easily repaired when parts are damaged.
5. For some outdoor applications, we can make it driven by diesel
engine or gasoline engine.
11600psi Water Blasting Machine Hydro Blaster Diesel Engine Drive
Characteristics as below:
| MODEL | PRESSURE | WATER FLOW | POWER | Plunger Diameter | STROKE |
| Bar | L/min | KW | mm | mm |
| LF-35/24 | 240 | 35 | 15 | 26 | 46 |
| LF-30/28 | 280 | 30 | 15 | 24 | 46 |
| LF-25/32 | 320 | 25 | 15 | 22 | 46 |
| LF-20/40 | 400 | 20 | 15 | 20 | 46 |
| LF-16/50 | 500 | 16 | 15 | 18 | 46 |
| LF-13/63 | 630 | 13 | 15 | 16 | 46 |
| LF-10/70 | 700 | 10 | 15 | 14 | 46 |
| LF-35/32 | 320 | 35 | 22 | 26 | 46 |
| LF-20/50 | 500 | 20 | 22 | 20 | 46 |
| LF-13/80 | 800 | 13 | 22 | 16 | 46 |
| LF-13/100 | 1000 | 13 | 30 | 16 | 46 |
Product Description
Industrial high-pressure washing machine is a kind of equipment
used to clean the surface of objects. The machine sprays
high-pressure water through the power unit. It can peel off dirt
and wash it away to achieve the purpose of cleaning the surface of
objects. Because it uses high-pressure water column to clean dirt,
high-pressure cleaning is also recognized as the most scientific,
economic and environmentally friendly cleaning method in the world
compared with chemical cleaning.
The bare shaft pump is used for machine replacement, or you can
choose to connect the diesel engine to the bare shaft pump.
Find the appropriate engine power and speed to connect the pump to
the engine. Connect to other accessories such as spray guns and
high-pressure hoses. You can use the whole machine.
Specific components within a water jetting system include abrasive
injectors, pressure generators, blast cabinets or booths, water
guns, and water tanks. Abrasive injectors can convert a water
jetting system into an abrasive blaster. The injection or metering
system controls the amount of abrasive pushed into the air stream.
In large systems, the delivery system and injection system may be
separate components. Pressure generators increase the pressure of
the carrier fluid (water or air). Plunger-type intensifier pumps
are commonly used to generate high pressure water for water jet
cutting, wet or water abrasive blasting and non-abrasive pressure
washing or rinsing.
Standard and custom high-pressure Hydro Laser units are built with
Tritan triplex or quintuplex pumps. Quintuplex and triplex pumps
are positive-displacement reciprocating pumps that are configured
with three or five plungers. High pressure water pumps used in high
pressure water blasting and water jetting operations.
These hydro laser high-pressure water pumps can be driven by
electric motor, diesel, or gasoline engine. A complete system
package can be ready to easily take care of your next difficult
cleaning job.
Features
This machine is made up of mainly by high pressure reciprocating
pump, power units and cleaning accessories etc.
1) High pressure reciprocating pump: the pump is horizontal triplex
plunger pump, driven by electric motor, made up of by power end and
fluid end.
- Power end: it is made up of by belt pulley(couplings), crankshaft
and connecting rod etc. Electric motor or diesel engine,or gasoline
engine driven the crankshaft and reduces its speed, and crank link
mechanism will change whirling movement to straight line
reciprocating movement.
- Fluid end: it is made up of by plunger set, high pressure cylinder,
pump body and water input and output valves etc. High pressure
cylinder is fixed on crankcase while connecting rod drives plunger
to do reciprocating movements, which make volume in cylinder do
cyclical change. When plunger is in-sucking stroke, the volume in
cylinder increases, water output valve closes, local vacuum is
formed. Working media enter into high pressure cylinder by going
against water input valve under high atmospheric pressure. When
plunger is in discharging stroke, water input valve closes, and
plunger transfer the working media to pump body by water output
valve, to pressure regulating valve, finally to high pressure spray
gun by high pressure hose.
high pressure reciprocating pump:horizontal type, three cylinder,
electrical motor or engine driven. It includes power end and
hydraulic end.
Power end；Composed by pulley, crankshaft, and connecting rod, and
so on. Through the triangle leather belt and pulley, the motor
drives and decelerates. When the motor drives crankshaft to rotate,
the crankshaft connecting rod translates rotation movement into
linear reciprocating movement. Then the plunger starts to move
reciprocatingly
GUARANTY OF QUALITY
We offer products of our own design and production and we guarantee
it is high quality. A quality control of performed works is one of
the main advantages of our Company. Important components of
effective work: high qualification of our engineers, strict
implementation of technical standards, application of quality
materials, use of the most modern equipment and software.
Strict materials incoming (quality) control and acceptance tests
Laboratory and bench testing
100% compliance with technology, international standards
Application of the most modern high-tech QC tools
All manufactured equipment passes bench and field tests
International quality level
Positive feedbacks from our customers
It is extremely important for us that all our customers are 100%
satisfied with the quality of our work!
INNOVATIVE AND TECHNOLOGY LEADER
Our mission is to continuously innovate, develop and offer the most
efficient equipment for our customers.
Own design office
Technology Innovation Center
The of Companies employs more than 100 qualified and experienced
engineers, designers and technicians
Own laboratory and test benches
Operative analysis and adjustment of design.
Applications
The pumps are widely used in oil refinery pipes cleaning, heat
exchangers pipes cleaning, ship hull cleaing,oil paitings
removing,rust removing,etc.
Meanwhile, our pumps also can be used for the fuel pipelines
pressure testing,gas steel bottles explosion pressure testing,all
kinds of the tubes pressure explosion testing, and so on.
As a 40 years manufacturing factory,we have many foreign customers
who came to our factory to visit.
some of the photos as below:
Applications:
it is widely used in ship cleaning,oil removing,fuel pipeline
cleaning in refinery fields.
some foreign customers give us comments below:
FAQ
11600psi Water Blasting Machine Hydro Blaster Diesel Engine Drive
Q1. What about the lead time?
A: 20 working days for mass production.
Q2. Do you have any MOQ limit for the product order?
A: Low MOQ, 1pc.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by sea shipping.
Q4. How to proceed an order for the product?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly:we sign a contract
Fourthly We arrange the production.
Q5. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.
