Conveyor Belt Skirting Polyurethane Material PU Sealing Skirting
Factory Price
Conveyor polyurethane skirting is installed on conveyor belt
loading point to eliminate spillage, dust and fines. polyurethane
skirting system keeps conveyor cleaner and safer, will reduce
maintence cost and downtime, save more manual work and money.
Technical Data Sheet:
| Material | polyurethane |
| Hardness | 63 70 80 90 shore a |
| Tensile strength | 40MPa |
| Abrasion loss | 43mm3 |
| Elongation at break | 600% |
more detail TDS, please contact us.
Specification:
| Thickness | Width/Height | Length |
| 10mm (3/8") | 100mm (4") | 15m (50'), 20m, 30m |
| 12mm (1/2") | 150mm (6") | |
| 16mm (5/8") | 200mm (8") | |
| 19mm (3/4") | 250mm (10") | |
| 25mm (1") | 300mm (12") | |
1. Colour: red, orange
2. Thickness: from 6mm to 40mm, as require
3. Width: from 100mm to 1400mm, as per request
4. Length: 10m, 20m, 30m
5. Hardness: 63 shore a, 70 shore a, 80 shore a, 90 shore a
6. straight edge or bevel edge.
Comparing with rubber skirting:
because of low coefficient friction, there is a power saving by
producing 60% less drag on the conveyor belt than traditional
skirting rubber.
1. PU skirting fit for all belt widths and through angles.
2. field tested with 3-5 times more wear-resistant than rubber.
3. 60% less coefficient of friction than rubber.
4. more belt friendly.
Photos:
