XCMG Official 26m straight arm aerial work platform telescopic
aerial work platform GTBZ26S
GTBZ26S Straight Boom Type Aerial Work Platform
The straight boom aerial work platform at the elevation of 26 meters
developed by XCMG is self-equipped with a small-sized fly jib, thus
having a certain capacity in obstacle crossing, and being
stretchable to any inaccessible position; the double-load control
system may automatically adjust the operating radius as the loads
may be, which will satisfy the different demands of the users on
different loads. It is an ideal choice for users engaged in
building construction, bridges, steel structures and installation &
construction both inside and outside the venue.
Details photo:
Main technical parameters:
| Item | Unit | Parameter |
| a Overall Length | mm | 12100 |
| b Overall Width | mm | 2490 |
| c Overall Height | mm | 3050 |
| d Wheel Base | mm | 3000 |
| Maximum Working Height | m | 27.9 |
| Maximum Platform Height | m | 26.2 |
| Maximum Working Range | m | 23.2 |
| Maximum Load Capacity | kg | 340 |
| Boom Luffing Range | ° | -5~+75 |
| Crank Arm Luffing Range | ° | -65~+70 |
| Rotation Angle of Rotating Platform | ° | 360 |
| Maximum Tail Wagging | mm | 1400 |
| Platform Size | mm | 2400×900/ 1800×800 |
| Rotation Angle of Platform | ° | 180 |
| Total Weight | kg | 16600 |
| Maximum Travel Speed | km/h | 6.1 |
| Minimum Turning Radius | m | 6.7 |
| Minimum Ground Clearance | mm | 320 |
| Maximum Grade Ability | % | 45 |
| Tire Specification | - | 385/65-22.5 |
| Engine Model | - | Foton CumminsQSF2.8-71HP |
| Rated Power of Engine | kW/(r/min) | 53/(2200) |
Advantages:
Ability in Fast Access to the Construction Area
The boom driven by a single cylinder and the synchronously
amplitude-varying and lifted stand column enhance the operating
speed, and realize the fast access to the construction area, which
will improve the construction efficiency.
Better Adaptability to Poor Construction Enviroment
The application of a lubrication-free shaft sleeve and slider
relieves the friction between each hinge point for connection and
inter-arm slider, thus resulting in better adaptability to welding
and dusty enviromeent.
Advanced power system integration control
Electronic-controlled engine is adopted as the dynamical system,
oil pressure, water temperature, rotating speed, sensor etc. are
integrated by engine and controlled through ECU, which is safe and
reliable. Meanwhile, there is a fault diagnosis interface as
supporting for convenient of fault diagnosis and maintenance.
Pre-service:
- Inquiry and Consulting support.
- Sample testing support.
- View our factory.
- Design various solutions as buyer's requirement.
After-sale service:
- Training how to use and maintain the truck.
- Our engineers supply the support of technology.
- 12 months warranty for 3 key spare parts(Engine,Transmission,Axle)
- Parts supply on time.
- 24 hours service and technology support.
Other products:
Truck series:
1. Dump trucks; cargo trucks (1-120ton)
2. Tractor trucks; (1-120 tons)
3.Tanker trucks,( 54873020, 54798871, 54798867, 54633157, 54622108,
54621778, 54621524, water tanker and oil tanker)
4. Mixer trucks and concrete pump truck
5. Mine dump trucks( 30 tons off-road mine tipper, 50tons/70tons
mine dump truck, 6x6 articualted dump trucks)
6. Off-road drive trucks( 4x4. 6x6 and 8x8 Trucks)
7. Garbage trucks( garbage compactor truck, suction trucks)
8. Truck mounted cranes(normal road truck crane, truck mounted
crane)
9. Special trucks( wrecker trucks, military trucks...)
10.Semi trailers( container semi-trailer, low-bed semi-trailer,
tanker trailer, dumper trailer...)
11.Truck spare parts
Machine series:
1.Wheel loader,Backhoe loader
2.Roller
3.Motor Grader
4.Bulldozer
5.Excavator
6.Crane(truck crane,crawler crane,truck mounted crane,self erecting
crane)
7.Forklift and 45t contain reach stacker
8.Paver and so on
9. Spare parts
