XCMG 215HP MOTOR GRADER GR215 WITH RIPPER AND FRONT BLADE XCMG Axle
Motor Grader
Description:
1.Using Cummins 6CTA8.3-C215 turbocharged diesel engine, the output
torque and power reserve factor is large, and the fuel consumption
is low.
2.The gearbox and torque converter are electronically controlled
power shifting and fixed shaft gearboxes. The torque converter has
a large torque coefficient, a high efficiency, a wide effective
area, and a good joint operation characteristic with the engine.
3.The drive axle is a dedicated XCMG axle.
4.Rear axle main drive is equipped with "NO-SPIN" without
self-locking differential. When one wheel slips, the other wheel
can still transmit its original torque.
5.The service brake is a dual-circuit hydraulic brake system that
acts on the two rear wheels of the grader and is safe and reliable.
6.The sealed cab is used to configure the air conditioning system.
The interior parts are sleek and compact plastic parts, which fully
reflects the needs of ergonomics.
sepacification of sold stabilizer
| Item | GR215DⅢ |
|
| Basic parameters | Engine model | 6CTA8.3-C215 |
|
| Rated power/speed | 160kW/2200rpm |
|
| Overall dimension (standard) | 8970x2625x3420 |
|
|
| Total weight (standard) | 16500 kg |
|
| Tire specification | 17.5-25 |
|
| Ground clearance (front axle) | 430mm |
|
| Tread | 2156mm |
|
| Space of front and rear axles | 6219 mm |
|
| Space of middle and rear wheels | 1538 mm |
|
| Performance parameters | Forward velocity | 5,8,11,19,23,38km/h |
|
| Reverse speed | 5,11,23km/h |
|
| Tractive effort f=0.75 | 87 kN |
|
| Maximum gradeability | 20% |
|
| Tire inflation pressure | 260kPa |
|
| Working system pressure | 16MPa |
|
| Transmission pressure | 1.3—1.8Mpa |
|
| Working parameters | Maximum steering angle of front wheel | ±50° |
|
| Maximum slant angle of front wheel | ±17° |
|
| Maximum oscillating angle of front axle | ±15° |
|
| Maximum oscillating angle of equilibrium box | forwards15°,Reverse15° |
|
| Maximum steering angle of frame | ±27° |
|
| Minimum turning radius | 7.3m |
|
| Scrape knife | Maximum lift height | 450mm |
|
|
| Maximum cutting depth | 500mm |
|
| Maximum tilt angle | 90° |
|
| Cutting angle | 28°—70° |
|
| Angle of revolution | 360° |
|
| Length & chord height | 4270x610mm |
|
| Oil filling amount | Coolant | 50L |
|
| Fuel tank | 280L |
|
| Engine | 24L |
|
| Transmission | 38L |
|
| Equilibrium box | 46L |
|
| Coolant | 28L |
|
| Hydraulic oil | 110L |
Other products:
Truck series:
1. Dump trucks; cargo trucks (1-120ton)
2. Tractor trucks; (1-120 tons)
3.Tanker trucks,( 55470323, 54640582, 54640443, 54622108, 54621778,
54621524, water tanker and oil tanker)
4. Mixer trucks and concrete pump truck
5. Mine dump trucks( 30 tons off-road mine tipper, 50tons/70tons mine dump
truck, 6x6 articualted dump trucks)
6. Off-road drive trucks( 4x4. 6x6 and 8x8 Trucks)
7. Garbage trucks( garbage compactor truck, suction trucks)
8. Truck mounted cranes(normal road truck crane, truck mounted
crane)
9. Special trucks( wrecker trucks, military trucks...)
10.Semi trailers( container semi-trailer, low-bed semi-trailer,
tanker trailer, dumper trailer...)
11.Truck spare parts
Machine series:
1.Wheel loader,Backhoe loader
2.Roller
3.Motor Grader
4.Bulldozer
5.Excavator
6.Crane(truck crane,crawler crane,truck mounted crane,self erecting
crane)
7.Forklift and 45t contain reach stacker
8.Paver and so on
9. Spare parts
More details,kindly contact with me:
With over 51 years of experience , we have becoem one of the key
manufacturers of trucks and road machiens in China .
Exporting to more than 50 countries for 14 years .
For more information ,contact us now.
