Sidetracking Operation Down Hole Motor 2-1/8" 54mm Downhole Motor

2-1/8" (54mm) Down Hole Motor for Sidetracking Operation

Sidetracking Wells is drilling a hole around unrecoverable junk, such as a stuck drill string ( Check also Pipe Sticking problem); it is necessary to place a cement plug above the junk at a required depth that will allow sufficient distance to kick off the cement plug and drill around, bypassing, the original hole and junk (junk mill). High-density cement plugs are usually recommended for this application.
In other words, oil/ Gas Wells may require sidetracking to re-drill the well to a new target, maybe to pass a fish or because of hole problems. To sidetrack any Oil / Gas well, you must develop a lateral force to allow the drilling bit to cut on the side of the hole. The drilling BHA geometry will provide this force. Our downhole motor will be your good choice.

Availability of our small size downhole motor:

Langfang Blue Water International Trading Co.,Ltd focuses on providing professional sourcing service and high class product with an effective cost to our customers from all over the world. We got good cooperation with the manufacturer inside China and many of them are even world famous. We are pleased to help our customers and partners to get the most suitable tools and equipment. At present downhole motors for oil & gas well drilling, HDD drilling and coal mine underground directional drilling are available; tri-cone bits of inserted teeth and milled teeth are available; PDC bits of matrix body and steel body are available; the drilling jars, drill pipes and collars even drill rigs are also fall into our range. Besides the cathodic protection products also fall into our range such as the insulating joints, the anodes and spark gasps. If anything found are not in our catalogue we would like to hlep finding the most suitable suppliers.