Low Fuel Consumption Water Circulation Pump Strong Driving Force For Water Cycle

Our Service:

We take customer needs very seriously. Tasks and challenges are solved together
with the customers - using our high expertise in product technologies, process
technologies and logistics. Our professionalism guides us through the development
and production process.

Knowing the customer is the priority of all we do.With the customers' specific
technical data and requirements fully in mind.We make a promise that every
process of the cooperation is clear. As production begins, we focus on working along
multiple lines. Even once the order has closed, MEDAS still provides meticulous
after-sales service.

Performance:

The wide range of pumps in the FB series suit a variety of applications.

• high heads with respect to power requirements.

• flat operating and power absorption curves, giving only moderate pressure variations with respect to large variations in delivery demand.

• high tolerance of the presence of entrained air in the fluid to be pumped.

Structural Characteristics:

• AISI 304 stainless steel PUMP BODY with UNI ISO 228/1 gas threaded suction and delivery ports.
• AISI 304 stainless steel back plate serving also as mechanical seal housing.
• General Electric® Noryl® GFN2V technopolymer EJECTOR UNIT (approved for drinking water).
• Centrifugal radial flow type IMPELLER in General Electric® Noryl® GFN2V technopolymer (approved for drinking water).
• AISI 416 stainless steel MOTOR SHAFT
• Ceramic and graphite MECHANICAL SEAL.
• MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor of suitable size, which is quiet running, closed and externally ventilated, suitable for continuous duty INSULATION class B (class F only 0.90 kW single phase).
  A thermal cutout relay (motor protector) is incorporated in single phase motors. Three phase motors require an adequate external motor protector connected according to current standards.
• CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335-1 (IEC 335-1, CEI 61-150) EN 60034-1 (IEC 34-1, CEI 2-3).
• REGISTERED MODEL

NOTE: It is always advisable to install a foot valve on installations that involve a suction lift.