FD Series 11kw Iron Material Water Circulation Pump Swimming Pool
Vacuum Pump
PARAMERTER:
Model | Voltage | KW | HP | Max-head (m) | Max-flow (m³/h) | R.P.M (r/min) | Input (mm) |
FD-40 | 380V/50Hz | 3.0 | 4.0 | 14 | 48 | 1450 | 43 |
FD-55 | 380V/50Hz | 4.0 | 5.5 | 16 | 60 | 1450 | 43 |
FD-75 | 380V/50Hz | 5.5 | 7.5 | 18 | 75 | 1450 | 43 |
FD-100 | 380V/50Hz | 7.5 | 10.0 | 18 | 120 | 1450 | 43 |
FD-150 | 380V/50Hz | 11.0 | 15.0 | 18 | 160 | 1450 | 43 |
FEATURES:
Anti-rust crust can stop water penetrating the engine. Enough
power, high head, big flux and high efficient circulation. Smaller
noise and run quietly. The pump cover bears high airtight
preventing the leaking. The main part of the pump is made of
special plastic which is anti-high or low temperature so it is
durable .Convenient to handle, easy to maintain, with the supplying
of spare parts.
1. Cast iron water pump, energy saving, high lift, large flow, low
noise.
2. The pump body is made of cast iron, small size, sturdiness and
durability.
3. The impeller, strainer made of stainless steel.
4. Motor shaft is made of stainless steel 304.
5. Easy to operate and maintenance, spare parts supply, motor
asynchronous two stage level.
6. Protection level: IP55
7. Insulation class: F.
USE AND MAINTENANCE:
1. You should make the pump working in the standard rotate speed in
use process, don't speed up at will, in order to avoid potential
safety hazard and impact the useful life of the pump.
2. Direct coupled type pump units:the chassis must remain stable,
so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the
belt loose or tighten must be moderate. If the pump doesn't turn,
it is generally because the impeller-ring get rusty, you can use
the mallet knocking the coupling axially.Pump mounting height(in
order to suction the water tank as the base)should be less than the
permit smoking on 1-2meter high vacuum.
3. You should stop the engine if you discover abnormalities(such as
noise, shock, hydraulic discharge descend etc.),and attention the
bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in
the pump, overhaul and oil, keep it in a dry and ventilate shade.
In winter, you should discharge the water at once when you stop
using it in case frost crack.After the pump every 1000 hours
operating time, you should take down and clean the bearing, and
exchange quick-wear parts.
OUR FACTORY:
FREESEA group has been engaged in water pump industry for more than
15 years. Mainly produce water pump equipment: swimming pool pump,
circulation pump, Multi-function submersible pump etc. It is
located in Ningbo city Zhoushan island, we provide OEM service for
many famous pool brand in foreign & domestic market. Pumps annual
output more than 20 thousands. We accept different standard(USA,
EU, CN etc).Has many branches in China main city and Spain, sales
network extend to all over the world.
OUR SERVICE:
We take customer needs very seriously. Tasks and challenges are
solved together
with the customers - using our high expertise in product
technologies, process
technologies and logistics. Our professionalism guides us through
the development
and production process.
Knowing the customer is the priority of all we do.With the
customers' specific
technical data and requirements fully in mind.We make a promise
that every
process of the cooperation is clear. As production begins, we focus
on working along
multiple lines. Even once the order has closed, MEDAS still
provides meticulous
after-sales service.
