Solar Powered Water Pump For Agriculture Farm Irrigation
Submersible Water Pump
Paramerter:
Model | Power W | H-max M | Hose Size mm | Dimension mm |
FS-004 | 4 | 0.6 | 8.5 | 35X35X25 |
FS-007 | 7 | 0.85 | 8.5/13 | 37X35X30 |
FS-008 | 8 | 1.2 | 8.5/13 | 45X45X36 |
FS-015 | 15 | 1.6 | 8.5/13 | 70X52X62 |
FS-021 | 21 | 2 | 16/19/25 | 90X60X72 |
FS-030 | 30 | 2.2 | 16/19/25 | 90X60X72 |
FS-045 | 45 | 2.5 | 16/19/25 | 110X72X100 |
FS-050 | 50 | 2.8 | 16/19/25 | 135X95X113 |
FS-060 | 60 | 3 | 16/19/25 | 125X72X100 |
FS-080 | 80 | 3.5 | 16/19/25 | 150X90X125 |
FS-095 | 95 | 4.5 | 16/19/25 | 155X88X125 |
FS-150 | 150 | 5 | 16/19/25 | 175X105X140 |
Maintenance:
1. If the pump will be not used for long-term, Please take the pump
out of the water, and let the pump work in the clean water for a
moment, and then dean the parts of pump and wipe clean
2. If the temperature is below 0 C, please take the water pump from
the water immediately and discharge accumulation of water in the
pump in case pump is broken because of freezing
Caution:
1. Before using the pump, please make sure the rated voltage marked
on the nameplate and the voltage of actual use is consistent.
2. When installing, removing and cleaning the pump, you must unplug
the power plug to ensure safety.
3. If the pump has been a serious collision, please check the pump,
if broken, please stop using immediately.
Not intended to be moved when plugged in or in operation.
The supply cord can be replaced if the cord is damaged the
appliance has to be scrapped.
Do not lift the pump by the power cord.
Please make sure the pump working in clean water.
Do not pump heated liquids with a temperature higher than 35℃.
The solar water pump system is an optical and mechatronic system
that has been rapidly developed in recent years. It uses the power
generated by solar cells to drive DC, permanent magnet, brushless,
and position sensor through maximum power point tracking and
transformation and control devices. The rotor double-sealed motor
or high-efficiency asynchronous motor or high-speed switched
reluctance motor drives the high-efficiency water pump to lift
water from the surface to the ground for irrigation or human and
animal drinking. From design to manufacturing modern technology
involving electrical, mechanical, power electronics, computer,
control and other disciplines, it provides an excellent means for
the development of modern agriculture, energy conservation,
environmental protection and so on. The system has good long-term
economic efficiency, especially compared with the common diesel
pumping, and has an overwhelming economic advantage. The
development of this new type of environmentally-friendly and
energy-saving products will undoubtedly bring great economic and
social benefits to the development of the industry and the
development of the economy, especially the development of modern
agriculture in the arid regions. It is particularly in line with
the construction of a resource-saving and environment-friendly
society. development strategy. Photovoltaic water pumps use solar
energy to be used in farmland irrigation, provide clean drinking
water for people and animals, develop garden economy, beautify
parks, construct colored fountains, raise oxygen for fish farming,
raise shrimp ponds, and beach salt fields without any external
energy. Water supply and drainage, etc. In addition, a large number
of international ordering intentions indicate that the
international market prospects of such high-tech products are very
encouraging. As a newly emerging industry, the PV pump system is in
line with China's sustainable development strategy.
Types of solar water pumps:
Brushed DC solar water pump
Brushless DC solar water pump (motor type)
Brushless DC solar water pump (magnetic drive isolated)
Characteristics of various solar water pumps
Advantages:
1. The motor type brushless DC water pump is composed of a
brushless DC motor and an impeller. The shaft of the motor is
connected with the impeller. There is a gap between the stator and
the rotor of the water pump. When the water is used for a long
time, the water will penetrate into the motor and increase the
possibility of motor burnout.
2. Brushless DC motors have been standardized, and there are a
large number of specialized manufacturers, which are relatively low
in cost and high in efficiency.
3. Brushless DC magnetically isolated solar water pump: The
brushless DC water pump uses electronic components to commutate
without using carbon brush reversing. It uses high-performance
wear-resistant ceramic shaft and ceramic bushing. The bushing is
integrated with the magnet through injection molding. The wear is
also avoided, so the life of the brushless DC magnetic pump is
greatly enhanced. The stator part and the rotor part of the
magnetically isolated water pump are completely isolated. The
stator and circuit board parts are sealed with epoxy resin, 100%
waterproof, the rotor part is made of permanent magnet, the pump
body is made of environmentally friendly materials, low noise,
small size, performance. stable. Various required parameters can be
adjusted by winding the stator and can be operated at a wide
voltage.
4. long life, low noise up to 35dB, can be used for hot water
circulation. The stator and circuit board parts of the motor are
encapsulated with epoxy resin and completely isolated from the
rotor. They can be installed underwater and completely waterproof.
The shaft of the pump is made of high-performance ceramic shaft
with high precision and good shock resistance.
