Intermediate Stand Rolled Steel Rings Anti - Corrosion Tungsten Carbide with ISO Certification

Tungsten Carbide Roll Rings working rolls intermediate stand roughing stand

Tungsten Carbide Roll Rings as the characters of high wear resistance, high corrosion resistance and good compressive properties which is an important parts in the steel bar and wire rod rolling.

The rolls are primarily applied in high speed wire line, Kocks three roll mill, seamless pipe stretch reducing mill, three dimensional rolls for cold-rolled ribbed steel bar, and composite roll for hot-rolled bar screw thread steel etc.

At present, our company can produce diameter <=480mm, thickness <=130mm .

We have annual production capacity of 2000 tons,

which fully meet the steel bar and wire rod manufactures demand for the tungsten carbide roll rings.

The allowable deviation of carbide roll rings

Radial runoutofgroove ≤ 0.013mm

Radial runout of periphery ≤0.01 3mm

End face runout ≤ 0.02mm

End face planeness ≤ 0 .01mm

End face parallelism ≤ 0.01mm

Innerholecylindericit ≤ 0.01mm

Roughness of carbide rolls

inner hole roughness 0.4 u m

periphery roughness0.8 u m

end face roughness 0.4 u m

Reasonal production

It is inevitable to find the microcrack on the rolling groove.The microcrack will gradually be extended,stretched and deepened.The groove shall be re-grinded immediately, while the depth of crack is reaching to 0.2-0.4mm.

Otherwise,the crack will be deepened quickly,which leads to a risk of broken TC ring.

The range of normal production is regulated as dollows, it should be reginded when it is reached.:

Stands of pre- finishing roll mill: (3500-4000) tons

1-2 Stands of finishing rolling mill: (1800-2500) tons

3-4 Stands of finishing rolling mill: (1800-2500) tons

5-6 Stands of finishing rolling mill: (1500-2000) tons

7-8 Stands of finishing rolling mill: (1200-1500) tons

9-10 Stands of finishing rolling mill: (800-1200) tons

Stands for reducing diamenters: (800-1200) tons

Beijing Sino Steel Engineering & Equipment Co., Ltd. is concentrating on developing of ferrous & non-ferrous making and Rolling technology, mainly.

As one of the most experienced Chinese suppliers of complete line and components for steel and non-ferrous industries, Beijing Sino Steel Engineering & Equipment Co., Ltd. is engaged in design, manufacturing, engineering and service activities on word-wide basis.

Overseas Partners (Office):

India, Indonesia, Malaysia, Thailand, Korea, Turkey, UAE, Qatar, Iran, Saudi Arabia, Kuwait, Germany, France, Canada, USA, Brazil, Etc.

MAIN SCOPE SUPPLY:

EPS Project Line:

EAF, LF, Continuous Casting Machine, Preheating Furnace, Hot Rolling Mill Line, Cold Rolling Line, Centrifugal Casting Line, Slitting Line,Cut-to-length Line, Cleaning Line, Pickling Line, Coating line, Levelling line, Billet grinding line ETC.

Components & Parts:

Mill stand, Coiler, Uncoiler, Gearbox, Leveller, Copper Mould Tube, Copper Mould Plate, Water Jacket, Water Cooled Cable, Forged Rolls, Casting Rolls, Roll Shell, Roll Core,Bearing, Universal Shaft, Lathe, ETC.

​