GG1412013-1 Front guard, Slurry Pump Spare Parts Suitable for
14-12G - G Sand Gravel Pump
Overview
The GG1412013-1 is the front guard plate, made of A05 and weighs
about 308KG.
The front plate of the slurry pump is one of the over-current
components of the slurry pump. Because the material to be
transported contains various solid particles and acid-base ions, it
causes serious wear and corrosion to the flow pump components, so
the slurry is Overcurrent components such as pump front guards have
high wear and corrosion resistance requirements.
In addition, the efficiency of the slurry pump has a great
relationship with the size of the gap between the front plate and
the impeller of the slurry pump. If the gap between them is too
large, the volume loss of the slurry pump will increase, resulting
in a decrease in flow rate and head, and the efficiency of the
slurry pump will be reduced. At the same time, when the clearance
is too large, the shaft seal component also has an influence, so
that the back pressure of the impeller increases, the filler seal
will fail, the slurry will leak, and the use time of the shaft seal
component is greatly shortened.
The GG1412013-1 is the front guard plate for 14-12G - G Sand Gravel
Pump.The 14-12G - G Sand Gravel Pump is a horizontal, single pump
shell centrifugal slurry pump. The pump has a wide flow path, good
cavitation performance, high efficiency and wear resistance. It is
mainly used for continuous conveying of strong abrasive materials
that cannot be transported due to the large size of the slurry. It
is suitable for dredging, sand absorbing gravel, dredging river
channel, river sand mining and metal smelting slag conveying.
Main Slurry Pump Parts :
Impeller , Volute Liner , Casing , ThroatBush, Frame Plate Liner
Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller
Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft
Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly,
Bearing Housing , Lantern Ring , pump discharge pipe , flange , and
so on.
Completely interchangeable with , L, M, HH, SP slurry pumps and
G/GH gravel pumps
For unlisted slurry pump parts, OEM service offered. Drawings
needed
Material:C2110, D3110, E4110, F6110, G10110, G12110
1>OEM slurry pump spare parts
2>Material: Alloy metal, natural rubber
3>Good performance, long wear life
4>Reliable quality
5>As your requirements or your drawing
