Low Hydraulic Tablet Press Machine , Pill Stamping Machine
Condition New
Rotary Covered Tablet Press adopts a fully enclosed structure with
the operation compartment isolated from the outside. Ensure the
cleanness in the tablet compressing area without causing cross
contamination with the outside. The compressing compartment is
wholly made of stainless steel, which is in compliance with the GMP
requirement on the production of pharmaceuticals.
Detail Information
The tablet press machine is made of stainless steel, which conform
with GMP standard. And it is easy to get the light demolition,
internal cleaning convenience purposes. Adopted PLC programming
controller realizing bi-directional repression and Imported
hydraulic components. All of the operations can be adjusted through
the PLC to the best state. Therefore, it is quite easy to operate
and can work stably, safely and accurately. The hydraulic
components are equipped inside of the machine and independent to
prevent the damage from outside, pollution-free ,easy release the
heat and the control panel can be design to demonstrate in
different foreign languages.
Tablet Press Machine Technology and Advantage:
* Demoulding Protection: Protecting the compressed tablet
well,which are damaged by improper mould forces in the course of
production.
* Uniform Density: Uniform density of the compressed tablet can be
ensured through special technology.
* Different layer different color: Can compress the tablet with
different layers and different colors.
* Multiple Production Capacity: Production capacity can be raised
many times under certain conditions.
* Safety Protection: If some abnormal condition occurs,it will stop
immediately and minimize its negative effects.
Features
- This machine is designed for pressing round tablets from various
kinds of granular materials. It is primary machine to fit batch
production of tablets.
- During operation, the speed of the turret rotation, the depth of
the filling material and the thickness of the tablets can be
adjusted.
- The mechanical buffer unit will prevent punches and apparatus from
overload damage.
- A powder suction unit is attached to take in the residual powder
can be eliminated and the collected powder material can be reused.
- With oil seal ring on punches, prevent oil from pollution tablet
and powder leakage.
With dust seal ring on punches, avoid powder leakage from turret
table.
It is equipped with variable frequency speed control device for
electrical control, convenient operation, steady running, it is
safe and accurate.
It is equipped with overload protection device, when pressure
overload, it can stop automatically.
Technical Parameters:
| Production Capacity | 5-7molds/min(the actual speed according to product process
requirement) |
| Working Pressure | ≤60T(1. step-less adjustment 2. can be bidirectional compress) |
| Working Stroke | Up stroke≤250mm,down strokes≤100mm(1. step-less adjustment 2.
Customized based on customer’s request. ) |
| Filling Depth | ≤100mm(1. step-less adjustment 2. Customized based on customer’s
request. ) |
| Product Mould | Customized according to the tablet features(Multi-cavity Mould) |
| Apply to Shape | Round, square, or special-shaped(suitable for a variety of shapes) |
| Motor Power | 7. 5kw 11kw(Servo) |
| Weight&Size | Approximately:2800kg 2400mm*850mm*2100mm(L*W*H) |
One station service to make sure our customer get good products and
good service.
(1) Professional advice and rich experience help to choose machine.
(2) Warranty time: All machines are guaranteed for one year.
(3) Any problem: If you have any questions or any demands, we will
reply you within 24 hours, except the special reasons once you
enquiry us.
(4) Additives: installation book, Manual book, tool box will be
sent with machine.
