Raise Boring Machine Roller Cutter 1.5m-3m RBM Cutter for mining
We fabricates drillbits for rocks, and currently we produce raise
boring roller cutters of high quality. Our roller cutters are sold
worldwide. We are supplier of some world renowned raiseboring
contractors.
With all in house production steps, we are able to provide a tight
quality control over each step, forging, machining, heat treatment,
assembly, etc.
We are using good quality steel and good quality carbide to ensure
a longer service life of each cutter.
We have cutters that can replace the Sandvik cutters, Robbins
cutters etc.
| Cutter Model (mm) | Φ1000 | Φ1200 | Φ1500 | Φ1800 | Φ2000 | Φ2500 | Φ3000 | Φ3500 |
| Cutter seat and Cutter model |
| soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard |
| Cutter seat | VN219 | 2 |
| VW219 | 2 | 4 |
| VZ219M | | | | | 1 | | | | 2 | | 3 | | 4 | | 5 | |
| VZ219 | | | | | 1 | 4 | 2 | 3 | 4 | 5 |
| VZ219H | | | | | | 1 | | | | 2 | | 3 | | 4 | | 5 |
| Cutter | VM219-41 | 2 | | 3 | | 5 | | 5 | | 7 | | 9 | | 11 | | 13 | |
| VM219-42 | 2 | | 3 | | 3 | | 5 | | 3 | | 3 | | 3 | | 3 | |
| VH219-51 | | 2 | | 3 | | 4 | | 5 | | 5 | | 6 | | 7 | | 8 |
| VH219-52 | | 2 | | 3 | | 4 | | 5 | | 5 | | 6 | | 7 | | 8 |
| Cutter seat and Cutter model | Φ1000 | Φ1200 | Φ1500 | Φ1800 | Φ2000 | Φ2500 | Φ3000 | Φ3500 |
|
| Cutter | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard | soft, middle | Hard |
| Cutter seat | VN219 | 2 |
| VW219 | 2 | 4 |
| VZ219M | | | | | 1 | | | | 2 | | 3 | | 4 | | 5 | |
| VZ219 | | | | | 1 | 4 | 2 | 3 | 4 | 5 |
| VZ219H | | | | | | 1 | | | | 2 | | 3 | | 4 | | 5 |
| Cutter | VM219-41 | 2 | | 3 | | 5 | | 5 | | 7 | | 9 | | 11 | | 13 | |
| VM219-42 | 2 | | 3 | | 3 | | 5 | | 3 | | 3 | | 3 | | 3 | |
| VH219-51 | | 2 | | 3 | | 4 | | 5 | | 5 | | 6 | | 7 | | 8 |
| VH219-52 | | 2 | | 3 | | 4 | | 5 | | 5 | | 6 | | 7 | | 8 |
The reamer is made up of five modules such as drill pipes, reamer
box, removable segments, saddles and cutters, different segments
can obtain different size of the reamer. The various cutters can
work in various rocks. A single damaged part can be convenient to
be replaced at the work site without being scrapped overall. These
can save a lot of investment cost and work cost. What’s more, it’s
easy to be transported to the worksite by dissembled in small size.
We offer different arrangement ways of the alloy teeth on the
cutters and different model of alloy teeth. We will provide the
most suitable cutters for customers to ensure drilling efficiently
and low cost according to the lithology.
