Highlights of LW-J750 Industrial Cold Welding Machine
1. The diameter of the solder joint is 2-12mm,
2. Power 7500W,
3. Pulse welding, continuous pulse, pull welding,
4. Arc voltage monitoring weld height tracking system.
Weld Height Tracking System:
Weld seam height tracking system: The arc voltage monitoring system
is used to monitor and control the height of the welding gun and
the workpiece during automatic welding / repair process. In the
automatic welding production process, when the arc deviates from
the weld seam, the arc is adjusted back to the weld seam position
in time and accurately.
Welding seam tracking system is roughly divided into three parts:
sensor, control system, and actuator.
Features of LW-J750 Industrial Cold Welding Machine
1. The welding seam height tracking system can automatically adjust
the height and make welding repair more flexible.
2. It can be matched with automatic tooling, which has higher
efficiency and lower cost, and solves labor problems.
3. Industry-leading technology to realize automatic surfacing of
inner holes.
4. The application of the product is not restricted by the fixture
and the work surface, and the application range is wider.
5. After welding, the teperature is low, and the workpiece has no thermal
deformation.
6. The welding seam is smooth and beautiful, and the welding spot
is silvery white without blackening.
7. The surfacing height is unlimited, and the machining allowance
after welding is accurate, saving time and effort.
8. No undercut, no porosity, no collapse, no annealing, no need for
preheating and heat preservation after welding.
9. The metallurgical bonding strength is high, and it can be
processed by turning, milling, planing and grinding after welding.
10. The current is accurately concentrated, and the damage to the base
material is small, which effectively solves the cracking problem
caused by internal stress.
11. The temperature after welding is low, and the heat-affected zone
is small, so the metallographic structure of the base metal is not
changed.
12. It can be welded and repaired, so that one machine can be used for
multiple purposes.
13. With 20 intelligent parameter storage functions, the operation is
simple and no professional welder is required.
LW-J750 Industrial Intelligent Cold Welding Machine Parameters:
| Equipment model | LW-J 750 | Product size | 500×300×520mm |
| Product weight | 35KG | Input power | Three-phase, 380V-50/60HZ |
| Power consumption | 10-7500W | Instsient max. output power | More than 150KW |
| Wire code | 0.2-5.0mm | Output current range | 10-310A |
| Pulse speed | Adjustable | Mode selection | Single-point / continuous / arc welding |
| Aron gas delay time | 9S | Welding height | Any |
| Protection level | IP21S | Cooling mode | The fan enforces air cooling |
