Chinese Metal Band Saw Horizontal Scissor Style Saw Machine
Have one year's warranty period.
Can provide OEM serive.
Operation regulation of sawing machine
1. The operators are the employees who have received professional
training in sawing machine operation. Chinese style
2. Employees who have not been trained or carefully read this
specification are not allowed to operate the sawing machine. Those
who violate this specification will be responsible for the
consequences. 3. Check before startup
(1) Confirm whether the power cord is in good condition. A kind of
(2) Make sure that the starting of the sawing machine will not
affect the surrounding safety.
(3) safe operation
(4) Turn on the cooling water power supply and confirm whether
there is cutting fluid. If not, add it.
(5) adjust the speed control handle of the sawing machine to the
rising position, turn on the power supply of the saw bow, and the
saw bow starts to rise. After it stops, clamp the saw material on
the table, then adjust the speed control handle to the falling
position, and the saw bow will fall. Pay attention to the control
of the falling speed. When the saw blade is lowered to the position
close to the saw material, adjust the handle to the saw bow stop,
turn on the power supply of the saw bow, move the saw bow, and
adjust the handle to the appropriate falling position Position,
turn on the cutting fluid, start sawing, pay attention to the
lowering speed of the saw bow during sawing, if it is fast, slow
down.
(6) board or board shall be used for the surface of the saw to
prevent from being pinched, and the saw shall be placed flat to
prevent the cut from being vertical. A kind of
(7) The operator is strictly prohibited to place his hand, head or
any part of his body under the saw bow; any part of his body is
strictly prohibited to be within 20cm from the saw bow. A kind of
(8) The operator shall know the saw size in detail before sawing,
and measure whether the cutting size is accurate before cutting the
clamped material.
| Type | GZ4230 |
| Cut capcity W*H (mm) | round 300 |
| square 300*300 |
| Bundle cutting W*H (mm) | Max. 200*90 |
| Min. 100*20 |
| Saw belt size(mm) | 3620*27*0.9 |
| belt line speed(m/min) | 15-80 frequency control |
| Main generator power(kw) | 3 |
| Hydraulic generator power(kw) | 0.75 |
| Cooling generator power (kw) | 0.04 |
| Working clamp style | Hydraulic |
| Saw belt tighten style | Hydraulic |
| Main trasmit structure | Turbine |
| Loading style | Extra roller |
| Volume of oil case (L) | 80 |
| Volume of water case (L) | 60 |
| Max single feeding (mm) | 500 |
| Working table height (mm) | 650 |
| Weights of machine (kgs) | 700 |
| Packing dimensions(mm) L*M*H | 1750*2200*1450 |
4. Equipment maintenance
(1) After using, the user shall stop all the power supply of the
saw, clean the equipment, remove the saw foam, clean the working
site and surrounding environment, return the tools and fixtures
(2) inject oil into the guide rail and the gear pair every day. A
kind of
(3) Check whether all wires are in good condition every month, or
replace them.
(4) change the hydraulic oil of the governor box every half a year
