Replacement Hydraulic Oil Filter Cartridge 307583 1300R050W/HCKB
In most forced lubrication systems, the filter is located behind
the pump and in front of critical machine components.This position
presents several problems for the filter.The first problem is
velocity. Normally, the filter at this point in the system must
handle 100% of the flow from the pump.
If the machine requires a large amount of oil to operate reliably,
the filter must be large enough to handle the flow.This can be
achieved by increasing the surface area of the medium or changing
the medium type to use a smaller fiber medium.
The filter must also be able to withstand pressure. The pressure
from the pump causes the fluid to push through the hole at a high
speed, which creates a weak spot in the filter. Collapse of the
center tube, blown out of the medium and joint and failure of the
end cover adhesive are only a few potential problems. The solution
is to use more powerful filters, which usually means higher costs.
The average strength of the lubricating system filter is higher
than that of the typical hydraulic filter on the return pipeline.
When installed on a low pressure return line, these filters do not
need to be made of a reinforced center pipe, sandwich medium, or
thicker casing.
| 0030D010BN4HC | 0090MA010BN | 0160R010BN4HC | 0400DN010ON | 0950R010BN4HC |
| 0030D005ON | 0095D010BN4HC | 0160R010ON | 0400RN010BN4HC | 0950R010ON |
| 0030D010ON | 0095D010ON | 0165R010BN4HC | 0400RN010ON | 1000RN010BN4HC |
| 0035D010BN4HC | 0100DN010BN4HC | 0160R010ON | 0500D010BN4HC | 1000R010ON |
| 0030D010ON | 0100DN010ON | 0180MA010BN | 0500D010ON | 1300R010BN4HC |
| 0040DN010BN4HC | 0100RN010BN4HC | 0240D010BN4HC | 0500R010BN4HC | 1300R010ON |
| 0040DN010ON | 0100RN010ON | 0240D010ON | 0500R010ON | 1320D010BN4HC |
| 0055D010BN4HC | 0110D010BN4HC | 0240R010BN4HC | 0630DN010BN4HC | 1320D010ON |
| 0055D010ON | 0110D010ON | 0240R010ON | 0630DN010ON | 0990D010BN4HC |
Hydraulic Filter Description
(1) The quality and performance can be guaranteed as original
elements.
(2) Filter accuracy: 1um, 3um, 5um, 10um, 20um, 25um, 40um, 50um,
80um, 100um, 150um, 200um
(3) Filter material: Glass fiber, filter paper, stainless steel
wire mesh.
(4) End caps material: Carbon steel & stainless steel & Aluminum &
Nylon & NBS.
(5) Temperature range: -4°F~212°F
(6) Collapse pressure rating: 21bar-210bar (Hydraulic Liquid
Filtration)
(7) O-ring material: VITON, NBR.
(8) Working medium: hydraulic oil
Hydraulic Oil Filter Cartridge Application
Metallurgy industry, electronic industry, pharmaceutical industry,
petroleum gasification, thermal power, nuclear power, etc.
Hydraulic Filters — Reliably Protect Your Systems and Equipment
