Technical Parameters
Material Spec color sheet and galvanized sheet; The raw material
width 1000mm, effective width 828mm, the rib height 28mm, rib
distance 28mm.
Thickness: 0.5 mm to 0.6mm. Coils stress 235mpa
Working Speed 2.0-3.0 m/min. ( nodal distance at 350mm, )
Cutting Tolerance ≤ ± 2.5mm ( length≤ 5000mm)
≤ ± 3mm ( 5000mm < length ≤ 10000mm)
Power Requirement Main motor power: 5.5Kw
Hydraulic station power: 5.5Kw
Uncoiler Max. Capacity: 5000kgs
Roller and stand about14 stands
Machine dimension about 13000mm*1550mm*1200mm(length*wide*height)
Mainbody dimension about 7500mm*1550*1200mm(length*wide*height)
(can be put into one 40'container)
Type of cutting Roll-formed and length-set cutting
Voltage: 460V 3ph 60Hz or as buyer's require
Material of Main Equipment
Roller MaterialHigh grade No. 45 forged steel, with
digital-controlled procession,
Panted with hard chrome.
Active Shaft Material High grade No. 45 carbon wrought steel, which
can improve the integrated mechanic feature of the shaft
Electric Elements PLC control panel, transducer imported from
Mitsubishi of Japan.
Cutter blade Cr12 mould steel with quenched treatment
Component and Function
Coil Feeding Equipment Consists of one uncoiler with capacity of
5000kgs and its base.
Guiding Equipment Adopting guiding bar and sliding block to control
the width and position of the steel sheet. The coil is guided in
the correct position and passed to the roll forming equipment.
Mainframe Transmission Transfer the main motor power to the rollers
through chains and sprockets, and also transfer the coil sheet.
Roll forming system: The main frame of machine is welded separately
and the outside wall is connected by screw after being rotoblasted
on the surface. The rollers are surface-chromeplated after being
machined by the exact machine tool.
Post Cut Equipment The length and blocks can be set by the buyer
through the control panel, when reach the set length, the machine
will cut the panel automatically. The cutting is finished under the
power of hydraulic station which guarantees the precision of
cutting.
Hydraulic Station Supplies the initial power to the cuter through a
closed oil tank. It is off without cutting, which can save the
power.
PLC Control Panel The electric controlling system of this machine
consists of five parts: Operating system, screen, PLC, transducer
and strong electricity part. The controlling system of this machine
are imported from Mitsubishi company of Japan. The system uses
modularized structure and has convenient, reasonable, canonical
wiring arrangement, and its maintenance is quite easy.
Supporter Table To support the finished panels. The quantity we
supply is 2 pieces with length 3000mm, it can support panels with
10000mm at normal condition.
Standard Equipment of Machine
Uncoiler 1pcs
Guiding Equipment 1set
Roll Forming Equipment 1set
Pressing equipment 1 set
Post Cut Equipment 1set
Hydraulic Station 1pcs
PLC Control system 1pcs
Support table 2pcs
Components for the Machine
The tile forming line includes in decoiler unit, sheet guideing
equipment, roll forming system, pressing equipment, cutting
equipment, hydraulic station, electric controlling system.
