Low Coefficient Of Friction Industrial Ceramic Parts Mechanical
Equipment
Fine Diamond Machining Full Density Parts
Ceramic parts fired to their full density are too hard for
machining with tool steel cutters or even conventional methods.
Following a final firing, when as-fired tolerances are not
sufficient, fine diamond machining (grinding) using diamond
impregnated cutters is often required. Features Ceramic commonly
fine diamond machines into fully fired ceramic parts include:
§ Diameters and surfaces that have tighter tolerance requirements
than can be achieved in the as-fired condition
§ Ceramic tubes and special extruded rods requiring fine features
or tolerances
Also, fine diamond machining is used at Ceramic to machine non
ceramics, including quartz.
No Machining All – Depending upon the requirements of the custom ceramic part, the
geometry and final tolerances can often times be achieved during
the near-net shaping, injection molding process. This is the most cost effective
solution. Features Ceramic commonly achieves with no machining
whatsoever include:
§ Fully functional ceramic screw threads
§ Square holes that cannot be machined
§ Specific radii and fillets
§ Other complex geometries that cannot be machined
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Product Description
Precision Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries. Low Coefficient Of Friction Industrial Ceramic Parts
Mechanical Equipment. We offer this expertise to all of our
customers to ensure the best design and materials are chosen for
their specific application and needs. Low Coefficient Of Friction
Industrial Ceramic Parts Mechanical Equipment, Typically, our
custom technical ceramic components and parts we supply are used
for one of three main reasons:
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical
Equipment
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical
Equipment
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical
Equipment
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical
Equipment
Precision Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical
Equipment
| General Characteristics of Materials: |
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High
| low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Low Coefficient Of Friction Industrial Ceramic Parts Mechanical
Equipment |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Low Coefficient Of Friction Industrial Ceramic Parts Mechanical
Equipment |
Delivery:
Custom OEM will be shipped within 15 days after determining the
parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc)about the
ceramic plates, please contact us or email:admin@cerampart.com
CEO: Admin deng
Dongguan Mingrui Ceramic Tech. Co. Ltd.
Add: No.21 Chuangxing Rd., 2nd Industrial Zone of Shangsha,
Chang'an town, Dongguan city, Guangdong, China 523867
Email: admin@cerampart.com
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
