Fireproof Materials Alumina Ceramic Parts Photovoltaic Processing
Equipment
The firing process stresses the material because the outer surface
acquires a "skin." That skin reacts differently than the inner
material. During grinding, the grain on the inside of a post-fired
part is exposed, and the part can warp out of tolerance once it’s
taken off the fixture.
We made a conscious effort to develop a deep specialty in diamond
grinding because that’s the area where we could provide a
value-added service to our customers
Art Meets Machining Science
"By virtue of the tooling we use, we transform all of our machines
into grinders, even if they are not traditional grinders per se,"
Mr. Mayer says. Lately, business demand has prompted the shop to
expand its capability in a different direction altogether. For
Superior, that capability has been supplied by the Vertex machining
center. It is equipped with diamond grinding tools to process the
complex and precise work on which the company was being asked to
quote. According to Mr. Mayer, the shop needed to specify a machine
that could machine accurately within "tenths" and do so
consistently. "To accomplish that, you need a machine with even
better positioning and volumetric accuracies than what your part
tolerances are. We follow an ‘eight times’ rule—your machine should
have eight times the resolution of the closest part tolerance, like
a coordinate measuring machine,"
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical Industry
etc. According to actual application and customer's requirement,
the purities vary from 95%-99.7% and the forming methods will be
different. The forming methods applied in our plant include dry
pressing, isostatic pressing, injection moulding, extrusion
moulding. With experienced engineers and talented workers, we are
confident to offer high quality, high precision, complex components
for customers worldwide.
Product Description
Precision Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries. Fireproof Materials Alumina Ceramic Parts Photovoltaic
Processing Equipment. We offer this expertise to all of our
customers to ensure the best design and materials are chosen for
their specific application and needs. Fireproof Materials Alumina
Ceramic Parts Photovoltaic Processing Equipment, Typically, our
custom technical ceramic components and parts we supply are used
for one of three main reasons:
Fireproof Materials Alumina Ceramic Parts Photovoltaic Processing
Equipment
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Fireproof Materials Alumina Ceramic Parts Photovoltaic Processing
Equipment
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Fireproof Materials Alumina Ceramic Parts Photovoltaic Processing
Equipment
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Fireproof Materials Alumina Ceramic Parts Photovoltaic Processing
Equipment
Precision Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Fireproof Materials Alumina Ceramic Parts Photovoltaic Processing
Equipment
| General Characteristics of Materials: |
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High
| low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Fireproof Materials Alumina Ceramic Parts Photovoltaic Processing
Equipment |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Fireproof Materials Alumina Ceramic Parts Photovoltaic Processing
Equipment |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .
