High Density Polished 3mm 4mm Zirconia Guide Rods Blue Black Color,
Zirconia Ceramic Parts
1mm 2mm 3mm 4mm Zirconia Ceramic Rod
Ceramic ZrO2 Zirconia Rod
Unlike other ceramic materials, zirconium oxide (ZrO2 - also known
as zirconia) is a material with very high resistance to crack
propagation. Zirconium oxide ceramics also have very high thermal
expansion and are therefore often the material of choice for
joining ceramic and steel.
Another outstanding property combination is the very low thermal
conductivity and high strength. In addition, some types of
zirconium oxide ceramics can conduct oxygen ions. Components made
from this material are significantly more expensive than components
made of alumina ceramics. Zirconium oxide ceramics are used, among
other applications, as tools for wire forming, as auxiliaries in
welding processes, as materials for crowns and bridges in the
dental industry, as insulating rings in thermal processes, and as
oxygen measurement cells in lambda probes.
Products made from Zirconium Oxide (ZrO2)
- Advanced Ceramic Tubes
- Bearing Technology in Automotive Engineering
- Bearings
- Cutters
- Dental Ceramics
- Drawing Tools
- Forming Applications
- Pumps, Components for
- Seal Rings, Bearings and Sealing
- Sealing Technology (Seal Rings, Bearings)
- Technical Cutters
- Tubes and Pipes
- Valves, Components for
- Wire Drawing, Components for
- Zirconium Oxide in Dental Applications
- Zirconium Oxide-stabilized Substrates
Material:zirconia ceramic
Key Specifications/Special Features:
- Specifications:
- SE temperature up to 2400°C
- High density
- Low thermal conductivity (20% that of alumina)
- Chemical inertness
- Resistant to molten metals
- Ionic electrical conduction
- Wear resistant
- High fracture toughness
- High hardness
Excellent features :
1. Material:zirconia graulation
2. Using many fine technology such as dry press molding and
isostatic press molding.
3. High strength,high hardness,resist to high temperature, wearing
and corrosion.
4. It can do a good job under mang bad conditions such as high
temperature,high
pressure,vacuum,inflammable,explosive,acid,alkali,steam,non-lubricated
environments.
5. Preventing material from contamination because of its extreme
low wear rate.
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical Industry
etc. According to actual application and customer's requirement,
the purities vary from 95%-99.7% and the forming methods will be
different. The forming methods applied in our plant include dry
pressing, isostatic pressing, injection moulding, extrusion
moulding. With experienced engineers and talented workers, we are
confident to offer high quality, high precision, complex components
for customers worldwide.
Product Description
Mingrui Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries. Anti-chemical Corrosion Zirconia Ceramic Parts Chemical
Stirring Rod. We offer this expertise to all of our customers to
ensure the best design and materials are chosen for their specific
application and needs. Anti-chemical Corrosion Zirconia Ceramic
Parts Chemical Stirring Rod, Typically, our custom technical
ceramic components and parts we supply are used for one of three
main reasons:
Electrical Insulating Zro2 Zirconia Bushing / Zirconia Sleeve for
Pipe Liner
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Electrical Insulating Zro2 Zirconia Bushing / Zirconia Sleeve for
Pipe Liner
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Electrical Insulating Zro2 Zirconia Bushing / Zirconia Sleeve for
Pipe Liner
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Electrical Insulating Zro2 Zirconia Bushing / Zirconia Sleeve for
Pipe Liner
Mingrui Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Electrical Insulating Zro2 Zirconia Bushing / Zirconia Sleeve for
Pipe Liner
| General Characteristics of Materials: |
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
Dongguan Ming Rui Ceramic Technology Co.,ltd is a professional
manufacturer which is specialized in zirconia ceramics. We have 10
senior engineers and lots of technologists; our ceramic products
are precision ceramic structure parts used mainly in industrial
field, which is made of strengthened structure zirconia ceramic.
Our products including strengthened structure zirconia
ceramic,ceramic bar,ceramic tube,ceramic shaft,ceramic
plate,ceramic sleeve,ceramic valve,ceramic plunger and ceramic arm.
The product we produced are applicable to Instruments,Medical
instrument,Clocks and Electronic Products,Mills,Energy and
Power,Machine and Metals,Autocar and Military and some other high -
end areas.
Dongguan Ming Rui have achieved great successes in particular
requirements which is based on cooperating with Tsinghua University
and professional knowledge and business experience by ourselves. We
get the low-budget and high-performance new ceramics products from
the high – quality raw materials and composite technology and
precision processed, technical and value are increasing strongly.
In professional technology, innovation, sincerity, sustainable
development, offering the high efficiency products, perfect
service, good reputation. By the way, our company have an unique
technical called “mirror polishing” which is improved our products
bright,color,smooth and made our product better than other
competitors.
Warmly welcome all the customer form the world to visit our
company!
