Good Chemical Stability Zirconia Seal Ring Zirconia Ceramic Parts
DurableMaterial:zirconia ceramic
Key Specifications/Special Features:
- Specifications:
- SE temperature up to 2400°C
- High density
- Low thermal conductivity (20% that of alumina)
- Chemical inertness
- Resistant to molten metals
- Ionic electrical conduction
- Wear resistant
- High fracture toughness
- High hardness
High Temperature Gaskets and Seals, made from a variety of
refractory materials. Our high temperature gaskets and seals can be
customized for specific applications are available for applications
up to 1600°C (2912°F). We offer a variety of gasket types for
different situations based on your unique needs. Made with the
highest quality assurance standards, you can be sure that our
gaskets will meet your needs, regardless of how complex they are.
Check out our range of gasket products today.
Available High Temperature Gasket Types:
- Dye Cut
- Tadpole
- Rope
- CNC machined
Available High Temperature Gasket Materials:
- Silica
- Ceramic fiber paper and blankets
- Polycrystalline blanket
- Zirconia paper blankets
- Rigid fiber board (various chemistries)
Applications include:
- Door seals
- Boiler, oven, and reformer seals
- Expansion joints
- Petrochemical heaters
- Annealing lines
- Sanitary ware shuttle and tunnel kilns
- Insulation covers
Excellent features :
1. Material:zirconia graulation
2. Using many fine technology such as dry press molding and
isostatic press molding.
3. High strength,high hardness,resist to high temperature, wearing
and corrosion.
4. It can do a good job under mang bad conditions such as high
temperature,high
pressure,vacuum,inflammable,explosive,acid,alkali,steam,non-lubricated
environments.
5. Preventing material from contamination because of its extreme
low wear rate.
Apllication:Materials for grinding and dispersed,structural
ceramics,electronics,refractory ceramics,magnetic
material,metallurgy,medicine,food,cosmetics,textiles,printing and
dyeing,pigment and other industries.
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical Industry
etc. According to actual application and customer's requirement,
the purities vary from 95%-99.7% and the forming methods will be
different. The forming methods applied in our plant include dry
pressing, isostatic pressing, injection moulding, extrusion
moulding. With experienced engineers and talented workers, we are
confident to offer high quality, high precision, complex components
for customers worldwide.
Product Description
Mingrui Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries. Anti-chemical Corrosion Zirconia Ceramic Parts Chemical
Stirring Rod. We offer this expertise to all of our customers to
ensure the best design and materials are chosen for their specific
application and needs. Anti-chemical Corrosion Zirconia Ceramic
Parts Chemical Stirring Rod, Typically, our custom technical
ceramic components and parts we supply are used for one of three
main reasons:
Good Chemical Stability Zirconia Seal Ring Zirconia Ceramic Parts
Durable
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Good Chemical Stability Zirconia Seal Ring Zirconia Ceramic Parts
Durable
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Good Chemical Stability Zirconia Seal Ring Zirconia Ceramic Parts
Durable
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Good Chemical Stability Zirconia Seal Ring Zirconia Ceramic Parts
Durable
Mingrui Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Electrical insulation Zirconia Ferrule Ring Ceramic Ferrle Zirconia
Ceramic Parts
| General Characteristics of Materials: |
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Good Chemical Stability Zirconia Seal Ring Zirconia Ceramic Parts
Durable |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Good Chemical Stability Zirconia Seal Ring Zirconia Ceramic Parts
Durable |
Dongguan Ming Rui Ceramic Technology Co.,ltd is a professional
manufacturer which is specialized in zirconia ceramics. We have 10
senior engineers and lots of technologists; our ceramic products
are precision ceramic structure parts used mainly in industrial
field, which is made of strengthened structure zirconia ceramic.
Our products including strengthened structure zirconia
ceramic,ceramic bar,ceramic tube,ceramic shaft,ceramic
plate,ceramic sleeve,ceramic valve,ceramic plunger and ceramic arm.
The product we produced are applicable to Instruments,Medical
instrument,Clocks and Electronic Products,Mills,Energy and
Power,Machine and Metals,Autocar and Military and some other high -
end areas.
Dongguan Ming Rui have achieved great successes in particular
requirements which is based on cooperating with Tsinghua University
and professional knowledge and business experience by ourselves. We
get the low-budget and high-performance new ceramics products from
the high – quality raw materials and composite technology and
precision processed, technical and value are increasing strongly.
In professional technology, innovation, sincerity, sustainable
development, offering the high efficiency products, perfect
service, good reputation. By the way, our company have an unique
technical called “mirror polishing” which is improved our products
bright,color,smooth and made our product better than other
competitors.
Warmly welcome all the customer form the world to visit our
company!
