1. PP macro fiber embossed is easy to disperse, can be evenly
dispersed in mortar and concrete, so as to ensure the crack
resistance
2. PP macro fiber embossed is convenient to use. It does not need to change the proportion of
mortar. Just put the whole box of fibers into the mortar mixture
and stir evenly after adding water.
3. PP macro fiber embossed has excellent economic performance: the equivalent diameter of PP
monofilament is only φ0.03mm, so the diameter to surface area ratio
is high, on the basis of crack resistance, can reduce the amount
(about 0.6kg/ m3).
4. PP macro fiber embossed is easy plastering: A large number of fine fibers evenly distributed in
the mortar, easy plastering, improve the surface and base strength.
5. PP macro fiber embossed has stable chemical properties, strong acid and alkali resistance,
and can be used in any engineering project.
PP Macro Fiber Embossed Applying Instruction:
1.Compound Amount. To resist the common cracks on surfaces,
0.6kg/m3 fibers to cement paint is enough, and for reinforced
application 0.9-1kg/m3 is enough.
2.Stirring requirement. The proportion of cement, sand and
aggregate is no need to be changed. Put cement, aggregate, additive
and fiber together, then stir after adding enough water (Do not
stir without water! ) and time for stirring can be prolonged for
2~3 minutes in order to make the compound mix completely.
PP Macro Fiber Embossed Specification
| Material | Polypropylene |
| Appearance | Embossed |
| Fiber Dimension (mm) | L: 48 / 54 / 64; T: 0.55-0.60; W: 1.30-1.40 |
| Tensile Strength (Mpa) | >600 |
| Elastic Modulus (Mpa) | >9900 |
| Acid & Alkali Resistance | Strong |
| Moisture Content (%) | 0 |
| Melt flow | 3.5 |
| Density (g/cm3) | 0.91 |
| Melting Point (ºC) | 170 |
PP Macro Fiber Embossed Packing:5kg net per box, 1200kg on a pallets, 12000kg in a 20GP, 24000kg in
a 40HQ
Certificate:
