SP Series SP-1B04 Parker KY9500 Crimped Air Bellows Single
Convoluted Industrial Air Springs
Cross Reference
Parker KY9500 / SP-1B04 / SP 1B04 / SP1B04 |
Specifications and Detailed Technical Parameters
Top plate: 1pcs x M8 and 1pc G1/4 air inlet
Bottom plate: 2pcs M8 mounting threads
Single Convolutions
Rubber and steel material
Sample Available
HS Code 8708809000
No Girdle hoop
No rubber bumper
Industrial air springs type
Air springs complete with crimped plates
Industrial air springs advantage
Strong adjustable: By increasing or reducing the compressed air in
the air cushion to adjust the hardness and height of the spring,
can adapt to different load and vibration conditions.
Good shock absorption effect: because of the energy absorption
characteristics of air, air spring has good shock absorption and
vibration isolation ability, can effectively reduce the vibration
of machinery and equipment, improve the stability and life of
equipment.
Light weight: Compared with traditional metal springs, air springs
are lighter, which can reduce the weight and cost of the equipment
itself.
Low energy consumption: Air spring in the use of low energy
consumption, small noise, less pollution to the environment.
Strong adaptability: Air spring is suitable for a variety of
different industrial applications, including mechanical equipment,
precision instruments, electronic equipment and other fields.
Easy installation: Air spring structure is simple, easy to install,
do not need lubrication.
The elastic coefficient of spring expansion can be controlled.
Adjustable load carrying capacity;
Easy to implement height control:
Reduce friction
The coincidence changes, but the natural frequency is basically the
same
Operation
Because of its flexible construction, air bellows are not as
critical to installation as traditional pneumatic cylinders, which
typically require rigid fixation and guiding, and provide only one
shaft in the 30° range between faces. Alternate axis
The position of the end plate may deviate by 10 mm.
When the pressure air bellows will be rented along the resistance
line. Therefore, in angular applications, attention must be paid to
the mounting geometry.
When decompressed air bellows will fit in surprisingly small
Spaces, especially for clamping or moving awkward shapes or very
heavy loads.
During operation, it is recommended that the unit not be allowed to
"hit bottom" or reach its maximum height. Various mechanical
devices can be used to achieve this.
Free maintenance because no friction due to no part on movement.
Non repairable, cups are crimped on the bellow.
Applications
Presses, air compressors, centrifuges, vibrating conveyors, control
hammers, casting machinery and textile machinery, optical and laser
instruments, integrated circuits, ultra-precision machine tools and
so on.
The related picture
