Fully automatic welding robot welding room workstation
Fuction
Welding robot welding room includes: welding robot, sheet metal
structure, rolling door, electrical appliances, smoke exhaust, etc.
Product | introduce |
Welding robot | Adopting Japanese OTC welding robot system, stable welding,
reliable quality, beautiful welding seam shape |
Sheet metal structure | High-strength sheet metal structure is used to ensure the welding
room is firm and reliable |
Rolling door | Electric rolling shutters are adopted, which will automatically
rise and fall during welding after making an appointment,
effectively preventing welding arcs and reducing personnel injuries |
Electrical appliances | Control the linkage of the entire workstation equipment, coordinate
the work of the workstation, and prevent confusion |
Smoke outlet | Extract smoke and dust from the welding room to keep the workshop
clea |
Wire Touch Sense System
When robots are used for welding, the workpiece and its associated
torches require good positional accuracy. However, the perfect
accuracy is not always guaranteed at the welding production site.
Therefore, for better and more consistent accuracy, the following
contact sensing systems can be retrofitted.
1.5.1 When the wire elongation must be accurate.
→Wire inspection function
During automatic welding, the wire elongation after welding may
differ from the set length. This function can be used to keep the
wire length stable. The robot is stopped and the wire is fretted to
check whether the wire is set length.
1.5.2 When determining if the part is correctly installed.
→Workpiece inspection function
In a typical automatic welding process, the positioning of the
workpieces is checked by sensors (limit switches, photocell) and
the sensing of contacts reduces the need for these sensors. Before
welding, the robot automatically corrects the position by moving
the torch position and using the torch nozzle to inspect the
workpiece.
1.5.3 When the workpiece position accuracy can not be guaranteed.
→Workpiece offset compensation function
During the robot welding process, the point taught by this function
and the point at which the workpiece is detected are automatically
corrected during the operation again. The correctness of the
welding can be guaranteed even when the workpiece is deviated. The
tip of the torch moves according to the set sensing pattern.
Package
After the production is finished for all the equipment, the seller
should make suitable package for certain equipment parts and label
the parts. Besides, the equipment package shall be intact during
the loading, unloading and transportation.
