High Temperature Deep-Pleated Heat Resistance For Clean Room, Oven
Equipment
High temperature HEPA filter is an air filter that can withstand
temperatures up to 250°C. It uses stainless steel as the frame and
glass fiber filter paper as the filter material. Widely used in the
spraying industry, oven, chemical, ultrasonic industry and other
high temperature purification sites.
The Deep Pleated design uses an aluminum separator as a divider
that divides the filter media and creates a airflow path tunnel.
Cleanliness level
This is similar to the normal HEPA filter, which achieves an
efficiency rating of H13 99.97% @ 0.3micron and H14 99.995% @ 0.3
micron. Different efficiencies can be achieved using different
fiberglass materials. Each High temperature HEPA filter is tested
by smoke to ensure that the filter is not leaking. Packed in
plastic bags to prevent long-term storage from being oxidized. A
single filter is packed in carton and then secured with wooden
boxes to ensure safety during transport.
Features:
1.High efficiency ,high working temperature,low resistance,good
uniformity winds,Low initial pressure drop,large dust holding
capacity ,environmental friendly and long service life,air filter
manufacturer
2.Efficiency:95%0.3um,99%0.3um,99.9% 0.3um ,99,99% 0.3um
99.999%0.3um ,99.9995%0.12um
3.Sealant:Red Silica Gel(250~280 ) Ceramic Glue(350~400 )
4.Filter media:fiberglass paper H10,H11,H12,H13,H14,U15
Model | Outside Dimensions(mm) | Rated air flow(m³/h) | Initial resistance(Pa) | Efficiency(%) |
TR-NGW-1 | 484*484*220 | 1000 | ≤220 | ≥99.99 |
TR-NGW-2 | 610*610*150 | 1000 | ≤220 | ≥99.99 |
TR-NGW-3 | 630*630*220 | 1600 | ≤220 | ≥99.99 |
TR-NGW-4 | 610*610*292 | 2200 | ≤220 | ≥99.99 |
* Customizable Size
Matters needing attention for air filters:
1. After cleaning the filter cloth, if the initial resistance value
of the filter is lower than the initial resistance value of the
filter installed for the first time, it should not be used and
replaced in time;The filter should be replaced even if the pressure
difference is greater than the initial value after two times of
cleaning.
2. When taking the HEPA filter, the case should be carried upside
down to make the HEPA filter land smoothly.
3. After cleaning the filter, check whether it is damaged or not,
and replace it in time. Do not rub, machine wash or shake dry.
4. In the cleaning process, the primary and middle effect filter
should not be confused, and should be numbered in order to
distinguish.
5. Each air purification system should have a set of spare filters
to be replaced in time when cleaning.
