Introduction:
JIAYUAN RCGF series juice filling machine combines rinse, filling
and capping together. The design is based on the advance
International technology and own many years of experience. After
considering lots of customers’ feedback, the machine adopts
suspended bottle catcher technology which allows it to fill with
different type of bottles by simply and easily change the bottle
catcher. It can be either used to fill the purified and mineral
water under ambient temperature, or used to fill the hot liquid
(juice or tea) by change of a few accessories.
Feature:
1.The juice filling machine is used to fill PET heat-resistant
bottle for fruit tea, juice and other high-temperature juice.
2.The core parts of machine employs PLC+, frequency convertor+ and
human-machine interface control technology
3.The machine can be connected with UHT, CIP control center and
bottle-invert sterilizer
4.The machine structure is reasonable and firm, the running state
is stable
5.The suspension bottle neck catcher allows the machine change the
bottle type easily
6.Safe protective devices ensure safety of operator and machine
7.Magnetic torsion type screw capper ensures the tightness of the
cap and avoids bottle damage
8.The module of screw capper ensures the tightness of the cap and
avoids bottle damage
9.Slight negative-pressure gravity circumfluence filling system
increases juice filling accuracy and reduces contamination
10.Unique control mechanism keeps circumfluence volume below 5%
11.Airtight valve made of non-plastic material prevents worn-out
particles from dropping into bottles adversely affecting product
quality
12.High efficient clean air filter circulation system ensures high
sanitary requirements
13.Low overall machines noise that is comparable to any
internationally known equipments in its class
14.Self-lubricationg system imported from America provides
continuous smooth operation
Washing part of bottle washing filling capping machine
a) Rotary pan is made of stainless steel 304.
b) The rubber clamp splice seizes the mouth of bottles, which is
fixedness and reliable.
Filling part of bottle washing filling capping machine
a) Rotary pan is made of stainless steel 304
b) The way of filling is gravitation filling.
c) The filling valve is adopted best stainless steel 304
d) The structure of filling valve is reasonable, the amount is
correct
e) When filling the bottle, the bottle is move but the valve is
stationary. The splint of bottle-neck seizes mouth of bottles. The
elevator device with the action of gear realize the up and down of
bottle
Capping part of bottle washing filling capping machine
Capping machine is one of the highest precision machines, which
greatly affects the reliability of device and the defective rate of
product. The characteristic is as follows:
a) The dropping cap guide track fixes the device which can protect
the cap from turning over and also set the device which can take
out the inverse cap, equip a photo electricity switch which can
stop the machine when lacking the cap and also avoid the situation
that there is bottle without cap.
b) The bottle inlet switch which is set in the capping machine,
with the locking cap which is the connection of the dripping cap
guide track and dialing cap pan controls the discharging of cap,
making sure that stop conveyor cap when there is no bottles ,avoid
the waste of cap.
Main parts of bottle washing filling capping machine
