10 Tons 15.75Kw Water Purifying Device / Water Purifier Machine For
Business
Quick Detail:
- Capacity range: 10 tons per hour
- Main material: SUS304
- Certificate: CE, SGS
- RO membrane brand: Hydranautics
- Main pump brand: Nanfang pump
- Main electric component brand: Mitsubishi
- Easy operate
10 Tons 15.75kw Water Purifying Device For Medicine Industry
Description:
1)RO water treatment
Type: RO-10T/H RO water purification system
capacity: 10T/H
2)The system process
Raw water→raw water tank → raw water booster pump→mechanical
filter→activated carbon filter →precise filter →high-pressure pump
→Reverse Osmosis Components→pure water tank→pure water
↑
Ozone device
3) The system description
This system uses mechanical filters, activated carbon filter as a
pre-class treatment, the effective removal of suspended solids in
raw water, sediment particles, organic colloids, organic matter,
odor, chlorine and other impurities, with pre-programmed as a
reverse osmosis desalination plant to remove the raw water Most of
the dissolved salts, bacteria, hot stream and so on, to ensure
finished water quality standards.
The system is set up automatic and manual modes.
Under normal circumstances, the system can be placed in automatic
operation mode of the work of continuous operation, automatic
monitoring water quality, simple, stable, safe and reliable.
4) Work
quartz sand filter
Raw water into the filter for a simple mechanical filter, mainly to
remove suspended solids in water, colloidal particles and other
large impurities in the water when the water pressure and the
pressure difference over 10Psi (0.7kg/cm2) or water SDI> 5, the
need for backwashing . In general, before running back wash once a
day.
activated carbon filter
Activated carbon is used wood, coal, shell (nuclear) and other
carbonaceous material through chemical or physical method
activation made. It has a very large number of pores and specific
surface area, which has a strong physical adsorption capacity, the
effective adsorption of organic pollutants in water. Primarily to
remove organic matter in raw water, chlorine, odor, color, etc., so
that the original residual chlorine in water ≤ 0.1mg / l, effective
protection of RO membrane from chlorine damage to parts of
activated carbon typically 12 to 18 months to replace a The main
residual chlorine as determined in raw water.
Under normal circumstances, it needs to backwash once a week.
5μm security filter
The third pretreatment, filter spray for the polypropylene melt,
filter housing is ABS material, mainly to remove the vast majority
of very fine suspended solids.
Reverse osmosis plant
RO reverse osmosis equipment adopts the membrane separation to
remove the water ions, organic matter, colloidal particles,
bacteria and other impurities in the water desalination and
purification to achieve the purpose. The principle is the solution
to penetrate the membrane of water and separated, the water is
leaking to the solution, the osmotic pressure between the two
phases, if the solution phase on the pressure, so the pressure is
the osmotic pressure, the solution to the water, the water will be
the opposite infiltration to, obtained using reverse osmosis
desalination of water. That is enough pressure in the raw water,
through the permeable membrane and into pure water, no water
through the membrane, the dissolved, suspended solids concentration
increases gradually, as the concentration of water out.
Reverse osmosis plant can not only desalt, but also filter out the
organic matter, bacteria and so on.
RO water product is on-line motored by the LCD conductivity meter.
Reverse osmosis systems are generally required to run once a day.
If it is stopped to run More than a week, it should be taken
protective measures, otherwise would have a serious impact on the
life of membranes.
Application
- food and beverage industry
- water reclamation
- biotechnology industry
- surface water treatment
- electronic industry
- medicine industry
- chemical industry
- petroleum industry
- pre-treatment of RO system and pure water treatment
Specifications:
Name | RO Pure water treatment equipment |
Specification | Model:RO-10000 Capacity of pure water: 10000l/h General power: 15.75kw Electrical power: AC220V 18A/380 9A 50HZ Ro membranes: 4040 24 items (1 grade) Multi-phases pump: cdl2-180/2.2kw 1 item Beforehand filter:Φ1200 x2200x3 2 items SS sediment membranes filter tube: Φ90x1000x3 items Booster pump: chl2-30/0.55kw 1 item Active carbon filter :350kg Out size of main machine (mm): 4700x3810x2380 Quartz sand filter: 350kg |
Competitive Advantage:
- Stainless steel plate thickness of filters is 4mm, more durable.
- Easy to backwash.
- Multi-phases pump protected without water
- Purified water high water level auto stop, low water level auto
start
- More beautiful appearance.
- Machine component can be adjustable according to customer’s
requirement.
- Protected when no power, poor power, larger electrical current
short circuit, creep age of electricity
