Pin Header Connector 1.27mm Serise Single Row Stack Straight Type
1*2PIN To 1*50PIN SQ0.46mm
What's the Pin Header
Pin header is a type of electrical connector, this connectorare
widely used in electronic or instrumentation of PCB (Print Circuit
Board) function as bridge between two PCBs which were blocked, and
used to take current or signal transmission
pin header is a form of electrical connector. It consists of one or
more rows of male pins typically spaced 2.54mm (0.1 in) apart, but
common sizes also include 5.08mm (0.2 in), 5.00 mm (0.197 in),
3.96mm (0.156 in), 2.00 mm (0.079 in), 1.27 mm (0.05 in) and 1.00
mm (0.04 in). The distance between pins is commonly referred as
pitch in the electronic community.
SYMEA122 126-XXXXA01 SQ0.46mm.pdf
PCB Connector orientations
The term PCB Connector refers to a basic multipin connection
system, typically in a rectangular layout. A mating pair of PCB
Connectors will either be for board-to-board or cable-to-board
(wire-to-board). The board-to-board layouts can give a range of PCB
connection orientations, all based on 90 degrees increments:
Parallel or mezzanine – both connectors are vertical orientation;90
Degree, Right Angle, Motherboard to Daughterboard – one connector
is vertical, one horizontal;180 Degree, Coplanar, Edge-to-Edge –
both connectors are horizontal orientation.
Other names for PCB Connectors
PCB Connectors are known as PCB Interconnect product. Specific
terms are also used for the two sides of the connection. There are
also some other names for PCB connectors: Male PCB Connectors
usually referred to Pin Headers, as they are simply rows of pins,
while Female PCB Connectors named as Sockets, Receptacles, or even
(somewhat confusingly) Header Receptacles.
FAQ
Q: How long is your lead time?
A: It depends. Normally, it is 2-6 working days if the goods are in
stock,
or it is 7-40 days if the goods not in stock.
Q: What is your terms of payment ?
A: For small amount orders, 100% better paid by PayPal or T/T in
advance. For large amount orders like more than
10000USD, 30% T/T in advance , balance fully paid before shipment.
Q: Do you have any MOQ limit for an order?
A: Yes, we have MOQ. different items have different MOQ. We will
mark MOQ when we quote.
Q: How to proceed an order?
A: Firstly, let us know your requirements or application. Secondly,
we quote according to your requirements or our suggestions.
Thirdly, customer confirms the samples and pay deposit for the
official order. Finally, we arrange the production and ship once
it's ready.
