Copper Oven Copper Up casting Machine To Make Scrap Copper To 8mm Copper

this machine make from scrap copper to 8-17mm coper

The line is specially used to produce high conductivity oxygen free copper rod. When the mould clamping wheel is changed, it can also produce other specifications of copper rod, copper tube and other cross-section products. The casting specification is copper rod Φ8-20mm, and the daily production capacity is about 6t. The melting furnace adopts one set 300KG / 80kW electric furnace, and the holding furnace adopts one set 80kW electric furnace. The annual output of two connected updraft continuous casting unit is 2000 tons / year. The unit is driven by imported servo motor and loaded with advanced pitch control system in China. Users can directly input pitch length to meet the special requirements of casting process.

Main technical parameters:

Two connected furnace

Rated total power of melting furnace 80KW

Rated power of holding furnace 80KW

Number of continuous casting heads 4

Copper rod doameter: Ф8-20mm

Maximum continuous casting capacity 2000T/Y

Upper leading speed 560-2400mm/min

Working hours per year 7200h

Level tracking accuracy ±2mm

Winding specificati φ700mm×φ1600mm×800mm

Power consumption rate of molten copper ＜345kwh/ton

Power factor 0.95-1

Cooling water pressure 0.25-0.3mpa

Take up form: frequency conversion synchronous take up (8-12mm with automatic cable arrangement function)

Take up drive mode: reducer motor drive

Up lead drive mode: AC servo motor drive, the transmission chain adopts the synchronous toothed belt drive without clearance

Operation interface: data display and servo motor are controlled by touch screen display

YUYANG MACHINE Co., Ltd. Was established in Dongguan city which is close to Guangzhou city in the year of 2009.

YUYANG MACHINE is professional manufacturer of cable extruder machine, copper bunching machine, wire twisting machine, copper drawing machine , coper oven, copper enameling machine, cable twisting machine, tapping machine. And we also provide parts like pay off rack, pay off machine, OD testing machine, Cable printing machine , coiling machine, meter count stand, caterpillars, pulling machine, iron bobbin, ABS bobbin.

We make 50 extruder line, 70 extruder line, 80 extruder line, 90 extruder line, 100 extruder line;

120 extruder line, 150 extruder line, 630 cantilever twisting machine line, 800 cantilever twisting machine line, 1000 cantilever twisting machine line, 1250 cantilever twisting machine line, 1000 bow twisting machine line. 1250 bow twisting machine line, 500 bunching line,630 bunching line, frame twisting machine line, tapping machine line...

We can help customer set up new cable factory, we can provide new production line for CAT5&6 internet cable, television TV cable, house wire, power cable, fire cable, automotive wire,

We have engineer who have more than 20 years experience in cable area, who will provide our customer the best suggestion when they are planing building new factory. We will tell you which machine is the best for your cables. And we will give customer’s training when they buy machines from us. We will install the machine, train their workers and give our professional advice for their cable project.

We already help customer to set up new cable factory in some country like Algeria, Nigeria, Sudan, India. . . . And we already sell machines to Pakistan, Egypt. . . . . .

We have good reputation from our customer, and if you need build new factory or add machines in your factory, then contact us, also if you have some problems in your cable production line such as PVC come out, copper is with center deviation , can not get good tension or right twisting pitch, or other problem then contact us too.