Digital Inkjet Printing Canvas Art Mural 3d Vertical Wall Printing
Machine
How to extend the service life of the printhead?
Printhead maintenance:
1. Use with care, do not touch the copper contact area of the
electronic signal or the inkjet hole metal plate, unless cleaned,
stored or replaced, do not remove the printhead.
2. Do not place the ink head in an extremely high or low
temperature environment, make sure that the ink cartridge cover
tight to prevent contamination, do not mix ink, otherwise it will
lead to printhead failure.
3. Correct practice: keep enough ink in the cartridge. The user in
the processing of ink pumping, gently click to make the ink slowly
flow into the ink supply system, and the ink cartridge air removed,
so as to ensure that there is no negative pressure in the ink
cartridge can be smoothly sprayed on the printing media.
4. Ensure that the contact behind the printhead clean: before you
work to check the contact behind the ink head whether there are ink
drops, if there are ink drops, spraying will appear a very regular
ink-breaking phenomenon, and even affect the other good ink head.
So we should pay attention to such a phenomenon. To ensure that the
contact circuit board is clean, do not make the contact circuit
board contacting ink, got damaged.
| UV Machine |
| Basic parameters |
| Data transmission mode | USB |
| L*W*H (main body from ground) | 70*31*239cm |
| Printhead | Auto cleaning |
| Ink consumption | 8-12ml/m2 (less than USD1/m2) |
| Ink base color | CMYK, customzied UV ink |
| Painting precision | From 720DPI, upto 2880DPI |
| Painting direction | Vertical |
| Painting speed | Multispeed adjustable, ~1-8m2/h |
| Voltage/power | 90-246V/380W,47-63HZ |
| Noise | Standy<20dBA, painting <50dBA |
| Storage/Operation | -10℃-35℃(59°F-95°F) |
| 10%-70% relative humidity, in non-condensation state |
| Surface tracing | Hyperbolic banner sensors, two-way induction up and down |
| Machine configuration |
| X axis guide | 5m rails |
| Y axis guide | 219cm |
| Z axis guide | 14cm |
| Display screen | 7’’ LCD |
| Spay distance | 0.5-1cm |
| X axis effective stroke | 470cm |
| Y axis effective stroke | 170cm |
| Z axis effective stroke | 10cm |
| Synchro belt | 1pc |
| Drive rack | 5pcs |
| Net picture print height | 1.7m, unlimited width |
| Machine weight | 71kg |
| Lead rails weight | 10kg*5pcs |
| Applied wall | Inside & outside putty wall, latex wall, white wall, diatom mud
wall, shell powder wall,
wooden wall, paper, brick wall, canvas, etc. |
| Control configuration |
| Ink container capacity | 400ml |
| Printhead cleaning | Auto |
| Pump test | Y |
| Z-Axis Automation | Y |
| Level | Y |
| Ultrasonic sensors | 2pcs |
| Performance configuration |
| Language | English |
| Painting mode | Bidirectional |
| Auto blank skip | Y |
| Ink supply mode | Negative pressure auto ink supply |
| Color matching treatment | Auto |
| Integrated voltage stabilizer | Y |
| Ink Heating | Y |
| Laser light | Y |
| Painting Media | All planar materials |
| Software | Professional Printer Maintop Software, ZKMC output software |
| Computer system | Windows XP, win7, win8, win10 |
| Remarks | The above data for reference only, may change due to continuous
product/model upgrading. |
Contact: Teresa Wu
In charge of foreign trade
Telegram/WhatsApp/WeChat/Mobile: +8613011010380
Email: wallprinter@foxmail.com
