SP-S Steam system
Technical parameters
*Steam consumption: 1.2-1.8t/h
*Boiler:2T/h
*Boiler pressure:13MPa
*Temperature inside pipes: 160－200℃
*Steam pressure:0.8－1.3MPa
*Single facer enter steam pipe diameter:￠48mm Drainage steam pipe
diameter:￠32mm
*Pre-heater enter steam pipe diameter:￠48mm Drainage steam pipe
diameter￠32mm
*Duplex-heater enter steam pipe diameter:￠48mm Drainage steam pipe
diameter￠32mm
*Gluing machine enter steam pipe dia.:￠48mm Drainage steam pipe
diameter￠32mm
*Baker and finalizing enter steam pipe diameter:￠48mm Drainage steam
pipe diameter ￠32mm
Characteristic
*Supplying steam for whole production line and steam using machine,
keep working temperature stable.
* Each machine has independent small steam system, five section
control temperature, save resource, easily adjust.
* Control working temperature can be completed by adjusting steam
pressure, and equipped pressure monitoring dial plate.
* Each drainage water unit has side way to drain air, the machine
will become cooling very soon when it stopped.
*Floating ball supply water device, 1/2 metal soft pipe and ball
valves connect with side way, plunger valve.
*Pipeline system connects with rotary heating parts by metal soft
pipes, so as to expand the usage life of rotary joints.
*All steam pipelines are of seamless steel pipes, make sure safety
usage under high pressure.
*All steam pipelines surface are painted with rusty-preventing
paint, brush sliver-power.
