Custom License Plate Hot Stamping Machine Car Licence Number Plate
Color Printer
Hot stamping technology introduction
The license plate hot stamping process is achieved by synchronous
heating and rolling of the hot stamping film to make the license
plate adhere to the ink coating, thereby achieving the purpose of
printing. Compared with the traditional mimeographing process, it
does not need to pass the ink and dryer, saves time and
electricity, and is the most advanced environmentally friendly
production process at home and abroad.
Technical characteristics
Hot stamping technology has the following advantages over
traditional mime printing processes:
· No need for mime printing and drying process, saving more
intermediate costs;
·High production efficiency and the purpose of fast card issuance;
·The hot stamping process has no organic solvent discharge, and it
is environmentally friendly and safe;
· Better transport safety and storage stability than ink;
· The patterned hot stamping film is anti-counterfeiting.
- The main parts are made of aluminum alloy, which is small, light
and convenient to move, especially suitable for license plate
production points;
- The rack comes with adjustable casters for easy movement and
fixing;
- The whole machine adopts ergonomic design, which is easy to operate
and beautiful in appearance.；
Technical features:
·The main parts are made of aluminum alloy, which is small, light
and convenient to move, especially suitable for license plate
production points;
·The rack comes with universal moving casters for easy movement and
fixing;
· Industrial tablet touch screen control, integrated parameter
settings, operation, equipment calibration, alarm information
prompts and other functions;
·The preheating device can preheat the semi-finished license plate
to reduce the heat loss of hot stamping and enhance the hot
stamping effect;
·The heat sink can quickly dissipate the device and save time;
·The film end adopts magnetic powder brake device, full digital and
high-precision tension control to avoid wrinkling of hot stamping
film;
·The rubber roller adopts imported silicone rubber and has a
temperature resistance of 300 °C;
·Imported far-infrared ceramic heating, uniform heating, fast
temperature compensation;
Parameter
| Power supply | Single phase AC220V 50Hz |
| Heating power | 2400W |
| Glue roll motor power | 90W |
| Recycling file motor power | 10W |
| Max wide | 170mm |
| Hot stamping temperature | 170℃～240℃ |
| Hot stamping gap Precision | 0.01mm |
| Conveyor belt speed | 1.8m/min |
| Preheat time | ≤40min |
| Glue roll working time | 2000h |
| NET size(L*W*H) | 870*435*525mm |
| NET weight | 160Kg |
| weight with packing | 200Kg |
| noise | ＜70DdB |
Voltage: AC220V±22V, 50Hz±1Hz
Power: 2800W
Ambient temperature: 10 ° C ~ 40 ° C
Grounding resistance should be no more than 4Ω
The environment is relatively closed, no obvious air flow
Configuring an air conditioner
Configuring several cameras
Configuring several fire extinguishers
Site requirements
· There is a fixed special place, and it is relatively independent
and safe.
· At least set production area, storage area and distribution area,
and the production area and storage area are relatively independent
·The area is more than 30 square meters
Warranty
The company's products are guaranteed for one year from the date of
purchase and lifetime maintenance.
(1) Free warranty period: for products caused by quality reasons,
The barriers are free of charge for one year from the date of
purchase.
(2) Anyone who exceeds one year shall be paid according to the fee,
depending on the fault condition.
Charge parts, repairs, and calibrations.
(3) If there is no maintenance unit in the user's location, please
send the product to the public.
Division repair.
(4) Non-warranty scope:
Any failure caused by improper installation, use, or storage;
Failure to use the power supply as specified, resulting in
malfunction;
Irresistible factors cause failure;
Demolition and repair by yourself caused a malfunction.
