merck Millipore ss316 sterility test validation Single side for
beverage factory
isolator.pdf
1. Technical Feature
High-efficient display of the differential pressure, real-time
monitoring of pressure, temperature, and humidity in cabin, and
indicator for working status are set.
It has dehumidification function, can adjust and control humidity
and temperature, and has low requirements for environment.
It adopts embedded stylus printer with data online printing
function.
It is designed with multi-function testing interface to test
concentration of hydrogen peroxide gas, floating bacteria, dust
particles and PAO according to requirement.
Integrated built-in bacteria collector has digital display of
rotating speed at unlimited speed-adjustable function and foot
switch control for convenient operation.
Completely customizable according to customer’s specific size.
2,Parameter
| Model | Size(MM) | Operate room | Air brake size | description |
| YT-S1306 | 1306*1048*2000 | 1306*1048*840 | NO | Double side soft cover,Turbulent flow,2+2 gloves |
| YT-S1806 | 1806*1048*2000 | 1806*1048*840 | NO | Double side soft cover,Turbulent flow,4+2 gloves |
| YT-S1806S | 1806*848*2000 | 1806*848*840 | NO | single side soft cover,Turbulent flow,4 gloves |
| YT-S1806A | 2400*1048*2000 | 1806*1048*840 | 500*600*500 | Double side soft cover,Turbulent flow,4+4 gloves |
| YT-S2400 | 2400*1048*2000 | 2400*1048*840 | NO | Double side soft cover,Turbulent flow,4+4 gloves |
| YT-S2400A | 3000*1048*2000 | 2400*1048*840 | 500*600*500 | Double side soft cover,Turbulent flow,4+4 gloves |
| Power Supply: | AC220±22V, 50HZ±1HZ |
| Power: | 2500W |
| Internal Illumination: | ≥300Lux |
| Noise: | ≤75dB(A) |
| Airflow for Sterilization: | ≤2.4m3/min |
| Air Exhaust Volume: | ≤600m3/h |
| Injection Rate: | 0～20g/min |
| Temperature for Vaporization: | ≤100℃ |
| Humidity for Dehumidification: | ≤30%RH |
| High Efficiency Particulate Air Filter: | Grade H14 with 99.995% of filtering efficiency |
| Sterilizing Agent: | 35% of food grade hydrogen peroxide solution |
| Capacity of Sterilizing Agent: | 500g |
| Dehumidizer: | molecular sieve |
| Specification of Detection Portal: | fast-loading interface at Φ32 |
| Interface Size of Air Exhaust: | Φ100mm |
| Sterilizing Ratio: | 106 for fat thermophilic spore |
| Size of Touch Screen: | 7＂ |
| Pressure Control Scope: | 0～100Pa |
| Pressure Resolution: | 0.1Pa |
| Temperature Resolution: | 0.1℃ |
| Humidity Resolution: | 0.1% |
| Purification Grade of Chamber Interior: | Grade 100(A)at static status |
Type YT-S1806 Isolator System
1. Sterility Test Isolators consisting of transparent PVC film is
selected. The whole structure and operation platform are made of
316L stainless steel, and the top is closed.
Structural design, sterilization system, integrated control unit,
air inlet and outlet system, air filtration unit, etc., more
beautiful and easy to clean and maintain;
2, Siemens touch screen design, improve operator comfort.
3, the operating compartment 6 gloves standard operating port
design, the main and secondary operating surfaces are 4, 2,
respectively, the transmission compartment 4 gloves standard
operating port design, no operation blind zone;
4. The sleeve is made of American material, and the airtightness,
chemical compatibility and mechanical wear resistance are further
improved;
5. Support two sterility test methods prescribed by the
Pharmacopoeia: membrane filtration method and direct inoculation
method.
6, the operation cabin, transfer cabin combination, can also be
used alone, directly integrate the pump unit of the collection
instrument to the operating platform;
7. The inlet and outlet ports of the Sterility Test Isolators are
all equipped with H14 high-efficiency filter and imported
high-performance centrifugal fan. The airflow mode in the cabin is
turbulent and can maintain positive pressure continuously.
8. Install the high-efficiency filter differential pressure
monitoring function to display the HEPA ventilation status in real
time;
9. The interface of the hydrogen peroxide (VHP) sterilizer is
reserved, and the inside is sterilized by using hydrogen peroxide
gas or ozone gas, and the lg6 sporicidal effect can be achieved in
the air and the exposed surface of the cabin;
10. The control system with remote control function, all important
information is displayed on the same touch screen for convenient
operation, and the required process parameters can be remotely
controlled and recorded by the microcomputer to meet the needs of
users to save experiments, production data and traceability;
Q: Do all products have English operating interfaces and operating
manuals?A:Yes, all our equipment has English operation interfaces, and if
necessary, we are also able to provide the edition in the user's
native language, and all products are available in English
operating instructions; if necessary, we can also provide the
user's desired language version.
In addition, there are are operating videos for our products for
the convenience of customers to use.
Q: How is the after-sales service of your company?
A:We offer quality guarantee for all the products, and for products
within the warranty period, we provide free services for all
damages not resulting from human beings. After the warranty
expires, we will charge cost price only
Q: What is your MOQ of the spray dryer?
A:1 set.
Q: How long is your delivery time of spray dryer?
A: Generally it is depending on order quantity.The specific time can be negotiated.
Q: How to choose suitable spray dryer?
A:tell us your work flow and requirements ,then we will recommend
you suitable equipment according to yourrequirements, application
experience and feedback from our clients.
Q: How to solve the equipment trouble during using ?
A:Please email us about problem with pictures or a small video will
be better,we will find the problem and solve it. If broken, we will
send you a new free part if in the warranty period.
