An optical distribution frame (ODF) is a frame used to provide
cable interconnections between communication facilities, which can
integrate fiber splicing, fiber termination, fiber optic adapters &
connectors and cable connections together in a single unit. It can
also work as a protective device to protect fiber optic connections
from damage.
Features:
1) Standard size, lightweight and reasonable structure
2) Splice tray inside changeable
3) Can be used in 19'', 23'' standard distribution frame
4) Suitable for ribbon and single fiber
5) Various panel plates to fit different adapter interface
6)Front mark on the plate is easy to identification and operation
7) 24C, 36C, 48C, 72C 96C 144C optional, with or without fiber
optic pigtails and adapters
8) Easy for management and operation
Application:
1) Telecommunications subscriber loop
2) Fiber to the home (FTTH)
3) LAN/WAN
4) CATV
We support fiber capacity | 12/24/48/72/96/144 cores |
Fiber Port | FC, SC, ST and LC |
Number of ODF disks | 12 for 1, 24 for 2, 48 for 4, 72 for 6, 96 for 8, and 144 for 12 |
Working temperature | -10 °C ~ +40 °C |
Storage temperature | -25 ° C ~ +55 ° C |
Relative humidity | ≤ 85% (+30 ° C) |
Atmospheric pressure | 70Kpa~106Kpa |
Nominal operating wavelength | 850nm, 1310nm, 1550nm |
Insertion loss | ≤ 0.5dB |
Return loss | PC ≥ 40dB, UPC ≥ 50dB, APC ≥ 60dB |
Electrical strength | ≥3KV(DC)/1min without breakdown |
Insulation resistance | ≥1000MΩ/500V (DC) |
Life | ≥1000 times |
Application range | Small and medium-sized wiring system for fiber to the cell, fiber
to the building, remote module office and wireless base station |
Operations:
1. Peel the cable , take off the outer and inner housing, as well
as loose contract tube, and wash off the filling grease, leaving
1.1～1.6m fiber and 20～40mm steel core.
2. Fix the cable-pressing card and the cable, as well as the cable
reinforce steel core.
3. Lead the fiber into the melting and connecting tray, fix heat
contract tube and melted tube to one of the connecting fiber. After
melting and connecting the fiber, move heat contract tube and
melted tube and fix the stainless (or quartz) reinforce core stick
,make sure the connecting point is in the middle of the housing
pipe. Heat the pipe to make the two into one.Put the protected
joint into the fiber-laying tray.(one tray can lay 12 cores)
4. Lay the left fiber in the melting and connecting tray evenly,
and fix the winding fiber with nylon ties. Use the trays from the
bottom up. After all the fiber has been connected, cover the top
layer and fix it.
5.Position it and use the earth wire in accordance with the project
plan.
Packing List:
1. terminal case main body: 1 piece
2. polishing sand cloth: 1 pcs
3. melting and connecting mark: 1 pcs
4. heat shrinkable sleeve: 2～24 pcs
5. tie: 4～24 pcs
Our advantages:
1. Good reply: Your inquiry related to our products or price will
be replied within 24 hours.
2. OEM&ODM: We can help you to design or put your logo and
company name into products.
3. Remote Technical support&Full Technical Document
4. Warranty: 1 year warranty( While the warranty is not responsible
for those broken by violence or updated with other brands.)
5. English software, English Indicator
6. Professional, Very competitive price
7. Large Stock, Fast Delivery
