ADG1606BRUZ-REEL7 Electronic Components
IC Chips 28-TSSOP Circuit Switch Single Dual Supply Operation 5Ohm
Product Status | | |
Switch Circuit | | |
Multiplexer/Demultiplexer Circuit | | |
Number of Circuits | | |
On-State Resistance (Max) | | |
Channel-to-Channel Matching (ΔRon) | | |
Voltage - Supply, Single (V+) | | |
Voltage - Supply, Dual (V±) | | |
Switch Time (Ton, Toff) (Max) | | |
-3db Bandwidth | | |
Charge Injection | | |
Channel Capacitance (CS(off), CD(off)) | | |
Current - Leakage (IS(off)) (Max) | | |
Crosstalk | | |
Operating Temperature | | |
Mounting Type | | |
Package / Case | 28-TSSOP (0.173", 4.40mm Width) | |
Supplier Device Package | | |
Base Product Number | |
ADG1606BRUZ-REEL7 Overview
As the electronic part is packed in 28-TSSOP (0.173, 4.40mm Width),
international shipping is convenient. High reliability is ensured
by the advanced packaging method Tape & Reel (TR). In Surface
Mount, this analog switch is mounted. Multiplexers and
demultiplexers have a number of circuits 16:1. Around -40°C~125°C
TA is the extended operating temperature. In total, there have been
28 terminations. Due to its 16 channels, the electrical component
produces high-quality output.
Powered by a 5V voltage supply, the electrical part should be
switched on and run. Into the electrical component body are
injected 28 pins. It consists of 1 circuits. Try searching with
ADG1606 to find analog multiplexer variants. Analog switches have
5Ohm internal resistance. Datasheets for functions of 28 pins are
available. Multiplexers should not be powered above 16V in normal
situations. An effective Dual, Single supply digital multiplexer.
It is recommended to use 3.3V as the lowest voltage for the
electrical part. The switch device would be able to operate with
300μA current. There's no problem with dual supply voltage for this
switch device. However, it shouldn't exceed 8V. For dual power
supplies, a voltage of at least 3.3V should be attached. In this
switch multiplexer, there are COMMON OUTPUT outputs available. It
can operate from 5V operating voltages. In 22MHz-bandwidths, data
can be transferred.
ADG1606BRUZ-REEL7 Features
16 Channels
300μA Supply Current
Bandwidth: 22MHz
ADG1606BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1606BRUZ-REEL7 Analog
Switches & Multiplexers ICs applications.
Data Acquisition Systems
Fiber In The Loop (FITL)
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
Automotive applications
Battery Powered Systems
SDH/SONET multiplexers
Precision test equipment
Central office
Audio and video switching
Industrial
FEATURES
4.5 Ω typical on resistance
1.1 Ω on resistance flatness
±3.3 V to ±8 V dual supply operation
3.3 V to 16 V single supply operation
No VL supply required
3 V logic-compatible inputs
Rail-to-rail operation
Up to 378 mA of continuous current per channel
28-lead TSSOP and 32-lead, 5 mm × 5 mm LFCSP
