Customized Automatic Sintering Gas Pusher Continuous Kil For Magnetic Material With Good Thermal Conductivity

Customized Automatic Continuous Sintering Gas Pusher Kiln For Magnetic Material With Good Thermal Conductivity

Qianjin pusher kiln can maintain a stable internal atmosphere. Because gas can also be supplied from the bottom of the kiln between the rows, this reduces the temperature and atmosphere variation in the up/down and left/right directions.

Because the kiln uses multi-level transport, it is capable of mass production with improved surface area productivity. By using it together with tools that have good thermal conductivity, it is possible to shorten the profile.

1﹑Applicable material

It is well used on alumina powder, zirconia powder, ceramic substrate, magnetic material, target powder, electronic components,advanced ceramic material.

2﹑Technical specification

3﹑Advantage

1. The degree of automation is high, the labor intensity of workers is low, the operating environment has been greatly improved, and the safety protection measures have greatly reduced the possibility of accidents.

2. Compared with the traditional gas-fired kiln, the temperature control accuracy is high, the temperature curve of the whole kiln is easy to adjust, and the adjustment range is large.

3. Compared with the push plate type electric kiln, the kiln chamber of the new gas push plate kiln can be made wider and higher, and the temperature uniformity is good.

4. From the calculation of heat balance, the thermal efficiency of product firing is more than double that of tunnel kiln. Compared with the original electric pusher kiln, the energy cost per unit product can be reduced by 1/2-1/3, and the product yield is also improved. Therefore, the new gas pusher kiln is an energy-saving kiln.

4﹑Patent

With proven engineering knowledge and more than 20 years' experience we can provide you the right furnace solution.

5﹑Customer Case in China

The first Mobile phone fast charging graphene heat dissipation film carbonization production line

The first ITO target powder roller furnace continuous production line in china

6﹑Foreign Customer

7﹑Package and shipment

We will well pack the goods based on the kinds of furnace and customer's requirement.

Jiangsu Qianjin Furnace Industry Equipment Co., Ltd. was established in July 1999. It is a national high-tech enterprise integrating the production and sales of electric heating kilns, gas kilns, advanced kiln furniture, kiln accessories and other industrial ceramics. Our company has a registered capital of 29 million yuan, fixed assets of 56 million yuan, more than 40 patents, and Our annual sales value is more than 150 million yuan. Our products are mainly used in the sintering of lithium battery new energy materials, rare earth materials, ceramic materials, magnetic materials, electronic devices, hard alloys, catalysts and other inorganic new materials. Our company has more than 150 employees, including 30 professional engineers.We have a functional material thermal equipment research and development center of Jiangsu province, and a pilot test base for lithium battery anode and cathode materials with an annual output of 150 tons. Our company has independent import and export trade rights, complete production equipment and supporting facilities, which can fully guarantee product's quality and delivery time. Various types of kilns and ceramic materials are exported to all over the world.