Portable CO Detector
OVERVIEW
Data recovery function; in case of misoperation, it is possible to
select partial or full recovery. It is possible to set whether to
display the maximum value, minimum value, average value, or not.
Standard USB charging port, with charging protection function, USB
hot plug supported, and the charging status instrument can work
properly. 2100mA high capacity rechargeable polymer battery is
adopted, so it is possible to work for a long period of time.
FEATURES
1. Multi-gas made simple, easy to wear, slim and compact
It is possible to simultaneously detect 1 ~ 4 types of gases, and
the units can be switched freely .
Units that can be selected: PPM, mg/m3, Vol%, LEL%, PPHM, ppb,
mg/l.
2. Compact design, easy to use
Handy and durable, the MS104 is intuitive to operate
single-handedly using three function keys.
The easy-to-read color display clearly lays out all the information
for you. Thanks to its compact and robust construction, the device
can withstand even the harshest conditions.
3. Large Data Storage Management, release and documentation in no
time
Standard configuration is the data storage capacity for 100, 000
entries.
Real-time storage and fixed time storage are supported, or only the
data of the alarm concentration will be stored.
It is supported to use the local host to view, and delete data, and
upload the data via USB interface to the computer for data analysis
or printing.RS485 communication is an optional configuration.
4. Clear signaling design
The signal system of the MS104K is based on a clear color code:
sound & light alarm, vibration alarm, display screen visual
alarm.These are also documented in the data logger.
SPECIFICATION
Gas | CO |
Range | 0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm and other ranges can
be customized. |
Resolution | 0.01ppm or 0.001ppm (0 ~ 10 ppm);
0.01ppm (0 ~ 100 ppm),
0.1ppm (0 ~ 1000 ppm),
1ppm (0 ~ 10000 ppm or more) |
Detection principle | Electrochemical, catalytic combustion, infrared, thermal
conductivity, PID photoionization, and so on, depending on the type
of gas, range, field environment and user demand. |
Sensor service life | Electrochemical principle: 2 ~ 3 years; Oxygen gas: 2 years or 6
years can be selected; infrared principle: 5 ~ 10 years;
catalytic combustion: 3 years; thermal conductivity: 5 years; PID
photoionization: 2 ~ 3 years. |
Allowable error | ≤±3% F.S (higher precision levels can be customized) |
Linearity | ≤±2% | Repeatability | ≤±2% | Uncertainty | ≤±2% |
Response time | T90≤30 seconds | Recovery time | ≤30 seconds |
Working environment | Temperature: -40 ℃ ~ + 70 ℃, humidity: ≤10 ~ 95% RH |
Power supply | 3.7VDC, 3000mA high capacity rechargeable polymer battery |
Display mode | 2.31-inch high-definition color screen |
Alarm mode | It is possible to set as sound & light alarm, vibration alarm,
sound & light + vibration alarm, turning off the alarm. |
Data storage | Standard configuration is the data storage capacity for 100, 000
entries |
Protection level | IP65 |
Explosion-proof mark | Exia II CT4 Ga |
Exterior dimensions | 130×68×34mm (L×W×H) |
Weight | 200g |
APPLICATION
All the cases which requires the portable rapid detection of gas
concentrations such as petroleum, chemical, pharmaceutical,
environmental protection, combustion gas distribution, warehousing,
smoke gas analysis, air governance, and so on.
