Tungsten Carbide Capstan Drum Block For Wire Drawing Machine
Capstan Drum Tungsten Carbide Surface
Tungsten Carbide Capstan Drum Block For Wire Drawing Machine
Wire Drawing Capstan/Block/Drum
1. Making equipment
Supersonic equipment(HVOF), vaccum treatment
2. Typical technology of surface:
There are two kind of process that our capstan factory is always
used. Detail pls see the following. (Capstan factory said: China
wire drawing factory always use process 1). Some Japanese and
Korean customers use process2). Capstan factory recommended
process2), factory According to the actual process tracking, the
process2) is more stable.
Surface is spray-welded with 31C tungsten carbide coating directly,
which is know as the wear-resistant alloy coating, the coating
thickness is 1.5mm - 2.5mm. After spraying, it is necessary to heat
and remelt the surface to ensure the strength and hardness of the
coating HRC58-62.
CO-WC, self-fusion alloy + 30%-50% WC + vaccum treatment
3. Main characteristics
Super-hard abrasion-resisting: ≥HRC60
top-quality surface roughness: Ra0.1
4. Suitable machine
Straight wire drawing machine
Pulley type wire drawing machine
Inverted vertical wire drawing machine
Copper wire drawing machine
Aluminum wire drawing machine
5. Model
| Model (Block diameter) | 300 | 350 | 400 | 450 | 500 | 560 | 600 | 700 | 800 | 900 | 1200 |
| Maximum diameter of inlet wire (mm) | 2.8 | 3.5 | 4.2 | 5 | 5.5 | 6.5 | 8 | 10 | 12.7 | 14 | 16 |
6. Photos
5. Our Services
In order to guarantee the customers are able fully to operate the
machine, if the customer need, we can help customer training,
includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Remove simple proble
All the products of our company have already been widely used in
metal products area.
1. We can test the machine in our factory or yours' according to
your requirement to train your workers.
2. One year gurantee for whole machine except vulnerable parts.
3. 24 hours technical support by email.
Any doubt Please contact us.
FAQ
1. Q:Do you have your own production factory?
A:Yes,we not only have our own factory,We also have a cooperative
relationship with more than one hundred factories in China
2. Q: How many years are your company engaged in the wire industrial
machines?
A: We are More than 20 years. We have our own technology develop department
and testing department..
3. Q: About your products, could you do it OEM?
A: Yes, OEM service is available.
4. Q: Do you also provide spare parts of pneumatic tools?
A: Once we confirm the models you'd like to order, we will send you
the diagram for checking and also suggest you some easy-broken
parts.
5. Q: For the product, could you spray other color of painting?
A: Yes, color can be customized.
6. Q: What's the delivery time?
A: It usually takes about 7-30 working days to produce one order.
7. Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment, other
terms could be discussed and confirmed then.
8. Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the
quantity of each model should not be less than MOQ.
9. Q: How does your factory do regarding quality control?
A: We always pay great attention to quality control from the very
beginning and every product was tested piece by piece before
delivery.
10. Q: Can your company send your engineers to my country for machine
installation, worker training?
A: Yes, our engineers went to more than 60 countries before. They
are very experienced.
11.Q: What's the guarantee time for your machines?
A: Our guarantee time is 1 years since the machine was installed in
your factory.
Our Company:
