Copper Wire Silver Plating Equipment Silver Electroplating Machine
1. Main parameters of silver electroplating machine
| No | Item | Specification |
| 1 | material | copper or cooper alloy wire |
| 2 | wire diameter range | φ0.05～φ3.5 mm |
| 3 | coating type | silver |
| 4 | coating thickness | 0.1～30μm |
| 5 | wire lines | 1 or 2 lines |
| 6 | speed | 0～300m/min |
2. Technological process of production
pay off→cathode discharge oil→water rinsing→anode discharge
oil→water rinsing→pickling→water rinsing→pre-plating
silver→recovery→water rinsing→silver plating→recovery→water
rinsing→protection→water rinsing→drying→take up
3. Main process introduction
Cathode discharge oil: remove the oil on the surface of copper wire to ensure the
binding force of the coating .
Anode discharge oil: same as the cathode discharge oil.
Pickling: remove the oxide from the surface of the copper wire.
Pre-silver plating : as a pre-coating, to ensure the subsequent coating and base
binding force.
Silver plating: the copper wire is coated with a uniform silver coating.
Protection: a protective film is formed on the surface of the product to
prevent oxidation and discoloration of the coating during transit
and storage.
4. Product appliction
Silver - plated copper wire is widely used in electronics,
communications, aerospace, military and other fields.
5. Packaging & Shipping
We can pack it by pallet, or according to the customers' specific
requirements.
Port: Shanghai/Ningbo
6. Our Services
In order to guarantee the customers are able fully to operate the
machine, if the customer need, we can help customer training,
includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Correct technological process control
(4) Remove simple problem
All the electroplating machine of our company have already been
widely used in electroplating area.
Any doubt please contact us.
