Reciprocate electroplating tin or tin-lead alloy production line
Tin or tin-lead alloy electroplating machine
1. Main parameters of tin or tin-lead alloy electroplating machine.
| No | Item | Specification |
| 1 | material | copper or cooper alloy wire |
| 2 | wire diameter range | φ0.05～φ3 mm |
| 3 | coating type | tin or tin-lead alloy |
| 4 | content of tin | 10-100% |
| 5 | coating thickness | ＞1μm |
| 6 | number of turns | ＜100 |
| 7 | wire lines | single |
| 8 | speed | 0～600m/min |
2. Technological process of production.
pay off→cathode discharge oil→anode discharge oil→water
rinsing→pickling→water rinsing→tin or tin-lead alloy plating→water
rinsing→neutralization→water rinsing→drying→take up
3. Main process introduction.
Cathode discharge oil: remove the oil on the surface of copper wire to ensure the
binding force of the coating .
Anode discharge oil: same as the cathode discharge oil.
Pickling: remove the oxide from the surface of the copper wire.
Water rinsing: clean the wire thoroughly after the tank to avoid mutual
contamination of the tank.
Tin or tin-lead alloy plating: the copper wire is coated with a uniform coating.
Neutralization:neutralize the acid on the surface of copper wire to prevent
discoloration on the surface of the product.
4.Packaging＆Shipping
We can pack it by pallet, or according to the customers' specific
requirements.
Port: Shanghai/Ningbo
4. Our Services
In order to guarantee the customers are able fully to operate the
machine, if the customer need, we can help customer training,
includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Correct technological process control
(4) Remove simple problem
All the electroplating machine of our company have already been
widely used in electroplating area.
Any doubt please contact us.
