KUS630 Series Ultrasonic Sensor Fully Sealed IP68 Corrosion Resistant Housing

KUS630 Series Ultrasonic Sensor High sensitivity Fully sealed IP68corrosion resistant housing

Dimension

The unit is mm.

Parameter

Measuring range	600... 12000 mm
Blind area	0 ... 600 mm(less than 600mm is an unstable work area,it is not recommended to work in this range)；there is a 300mm blind zone version that can be customized.
Power supply	3.3 ... 24V DC , ripple 10 %SS
Working current	≤ 45 mA(maximum measurement speed) Low-power version: the hibernation power is less than]0.3mA, the transmit power is less than 20mA (less than 2ms), and the receive power is less than 5mA(less than 150ms).
Output	1 Programmable analog output 0-10V. 2 RS485 output. 3 UART serial port output 4 .4-20mA output 5.Switch output
Accuracy	≤1 %
Temperature compensation	Yes

The working conditions

Operating temperature	-40…85℃ (233...358K)
Storage temperature	-40…85℃(233...358K)

Other instructions

Electrical	5-wire cable / 6 wire cable for switch ouput
Protection grade	IP68
Material Housing	PVC /PVDF/PTFE(Default PVC)

Sensor Function

Analog

The analog output can be set through RS485, and the sensor can work in 8 modes. The specific reference is as follows:

Step 1: Connect to the host computer through serial port debugging assistant or modus debugging assistant.

Step 2: is to set a near point reference distance point.

Step 3: set a far point reference point

Step 4: is to set the output voltage or current of the near-point reference point.

Step 5: Set the output voltage or current of the remote reference point.

Step 6:is to set the analog output as the switch characteristic selection.

Step7: is to set the analog output as a linear output or switch output option.

Step 8: reset the sensor to make the new parameters take effect.

8 working modes of the sensor.

1: Open window mode by default

2: The window mode is closed by default

3: Single point mode is turned on by default

4: Single point mode is turned off by default

5: Single-point hysteresis mode is turned on by default

6: Single-point hysteresis mode is turned off by default

7: The presence or absence detection mode is turned on by default

8: The presence or absence detection mode is turned off by default

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of  measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.