Fully Automatic PET Output 4Straps Manufacturing Machine
400-450KGS/H
Product Description
PET strap making machine
PET packing strap is widely used, replaced for steel strap for
packing application internationally, because of its good tensile
strength, flexible, low prolongation rate, good performance of high
temperature resistant, non-rustiness, and low use-cost, etc, it is
used in steel, construction material, chemical fiber, paper making,
tobacco, agriculture, election, etc.
Characteristic
PET packing strap machine
1. The raw material treatment is by our serious dehumidify and
dryness system, it ensures the humidity in raw material less than
80PPM.
2. Closed circulation feeding system prevent the material from
exposure on air to keep the dryness of raw material.
3. The screw is specially designed for PET application, it consists
of separate and mixing part to keep the even plastication, also by
fixed material feeding system, the extrusion is stable, which
ensures the good dimension of PET strap.
4. The machine can produce 4 strap at the same time.
5. The mould is specially designed, equipped with two-stage filter.
6. Constant temperature heating device provide even cooling
environment for PET strap to raise the tensile strength
performance.
7. Anneal treatment for finished PET strap to remove the part
remaining stress to keep good shape
8. The winder is double disk type with easy operation and coil
changing.
Machine List
PET strap Extrusion Machine
※ Dehumidification and drying system 1 set
※ Oil and dust filter 1 set
※ Horizontal mixer(5000L) 1 set
※ Pre-drying tower(5000L) 1 set
※ Screw Feeder 3 set
※ Barrel 1 set
※ ¢125mm Extruding Machine 1 set
※ Melt pump 1 set
※ Single cylinder filter 1 set
※ PET Mould output 4straps 1 set
※ Cooling water tank 1 set
※ Stretching oven 1 set
※ Five roller gearbox 3 set
※ PLC electrical control system 1 set
※ Forming oven 1 set
※ Double disk winder 4 set
Features
PET Strap Extruder Making Machine
- Screw with compression ratio especially for PET, gradually changing
diameter and deeper thread groove at the melting part;
- Gearbox with hardened gears;
- Die can be precisely adjusted to ensure stable production and
smooth surface of straps;
- Stainless steel cooling trough with four thermo treatment processes
displaces the traditional one;
- Haul off rollers with bigger size ensure the quality of products;
New rolling technology overcomes the shortcomings of traditional
rolling machine like high gradient and bending delection;
- Laser embossing roller makes clear and even patterns.
Machine Pictures
