PP strapping equipment can be equipped with automatic winding
machine/semi-automatic winding machine
DESCRIPTION ABOUT PP STRAP MAKING MACHINE
The PP strapping tape production line is a high-end intelligent
equipment with a PLC control system, a special screw for the extruder, a non-stop screen changer, etc.
The PP strapping tapes produced are of consistent specifications
and beautiful appearance, and are widely used in many industries.
Screw----PP polypropylene belt production machine is made of high-quality
materials, screw material is 38CrMoALA, to ensure durability and
long-lasting performance. In addition, this machine comes with
video factory inspection, which makes for easy and accurate quality
control.
PLC------PP strapping equipment adopts advanced technology to ensure high
efficiency and precision of production. The machine is easy to
operate, and the PLC touch screen control system is ideal for
various specifications, supports multiple languages, and is easy to
debug.
Raw materials--------PP polypropylene new granular material or recycled material
| Extruder Model | single screw 2 straps | single screw 4 straps |
| Main Motor Power | 80KW | 100KW |
| Overall Size | 30*2.0*4.0M | 38*2.0*4.0M |
| Output | 100KG/H | 200KG/H |
| Voltage | 220V/60Hz | 380V/50Hz |
Process flow of PP packing belt production line
① Feeding →② stirring →③ pre-drying →④ melting and measuring
extrusion →⑤ embryo (belt embryo) cooling and forming →⑥ oven
preheating →⑦ primary stretching →⑧ secondary stretching →⑨
embossening → oven tempering and setting → cooling → finished
product winding
The PP strapping equipment adopts intelligent PLC Chinese/English
version control system, which is simple and easy to understand,
beautiful, durable, long life and low failure rate. The equipment
has an exclusive parameter memory system, which can store data
after production of each specification, and can directly call out
the parameters for the next production.
PP strapping equipment can be equipped with automatic winding
machine:
Main functions:
1) use the servo motor to lay the cable, and wind up the PP STRAP
with the width of 5-19mm. Select the corresponding bandwidth through the touch screen to
wind up, and there is no need to manually replace the transmission
gear.
2) After the winding is completed, the machine will stop
automatically, replace the paper tube, cut off the PP STRAP and
clamp the pieces to fix the STRAP head, and the winding operation
will be carried out automatically, and the whole process will be
completed automatically.
3) The winding shaft uses the torque mode of servo motor, and the
torque during winding can be set through the touch screen, so that
the PP STRAP with different gram weight or width can be wound with
appropriate torque, so be best to minimize the bending deformation
of the PP STRAP after winding.
